Best TWP Stain for Fence
Like any exterior wood surface, wood fences need to be protected from the elements to prevent wood rot, decay and fading. The best TWP Exterior Wood Stain for wood fences is the new TWP 1500 formula. This new version outperforms the previous TWP 500 series. The 1500 series is designed for improved penetration and faster dry times.
TWP 1500 is a low VOC wood preservative that has a unique blend of pigments that help protect against unsightly wood graying, fading, and darkening. This is why the 1500 series is best for cedar, redwood, mahogany, and pressure treated pine fences. Its special blend of powerful mildewcides also helps inhibit mold and mildew growth, which can jeopardize the integrity of your wood fence.
With many colors to choose from, TWP (Total Wood Protection) will preserve the wood’s natural color, will shed water longer, prevents mold/mildew, cracking, splitting, warping, and is easy to apply. TWP 1500 Series Exterior Wood and Deck Stain is a low 250 VOC formula that is compliant in 50 states. TWP is the only EPA registered wood preservative on the market.
TWP 1500 Series will keep your wood fence looking naturally beautiful and free from water damage, discoloration, and sun fading. The easy to apply and maintain formula will ensure that you enjoy your investment for many years to come.
Ask Questions in Comment Area Below
Can I order TWP stain for fence product in Los Angeles, California?
We sell online on this link: https://www.twpstain.com/twp-1500-series
Hello! I’m having a new 6 foot cedar fence installed today, and I was told to wait 1 month before staining to let the sap seep out. Here are my questions:
1. For that much fence, how many gallons will I need for both sides of the fence? Do I need to do 2 applications (wet on wet) or wait a few years? If 2 applications how much stain do I need?
2. Can I paint the stain on? Or do I need a pump sprayer?
3. Do I need to do any prep if my fence is only 1 month old and still cedar in color?
4. I would like it to be as natural (light) in color as possible, but I read that the clear doesn’t offer UV protection, so what color would you recommend?
Thanks!
jennifer
See here about new wood first: https://www.twpstainhelp.com/prepping-new-wood-for-twp-stains/
1. We would need a total sq footage for both sides added up.
2. Brushes, stain pads, or sprayer.
3. Honeytone is the lightest.
Last year we built a 3 rail fence with wood posts 4×4 and 6X6 with gates made from 2×6’s. The rails are 2×6 and all of it is treated pine. How do I calculate amounts of prep and sealer?
If you total up your sq footage of wood to stain, then we can help with the amount needed.
Thank you.
looks like I have 794 square feet to cover. It is one year old treated pine. I live in Indiana so it looks like I need 1500.
i can’t tell by looking at your literature if I should clean with bleach water or Gemini?
Also, is application wet on wet first year or one coat now followed by one coat next year? That will change coverage and amount I need to buy.
You would need the 1500 Series. Prep with Gemini Kit. Wet on wet this year, another coat in 2-4 years for a fence. About 7-8 gallons.
There seems to be contrary information posted from your team on application of TWP on one year old wood. I’ve asked the question previously but if I see several responses that are contradictory. Here is one example that says one coat only first year application. I’ve already purchased but which application rate is truly the correct or does it not matter?
Thanks for all the help.
One year is the cutoff for new wood plus fence wood is more porous then decking. Use two coats wet on wet for yours.
Hello – We used TWP 100 Series Protectant on our 6 ft tall cedar fence 2 years ago. When should we think about staining again?
On a fence, every 3-4 years is normal. Maybe longer but that depends on the UV exposure.
Ok, thanks. If 2 coats were applied initially when stained for the second time, would 1 coat be sufficient? Thank you!
Yes.
About to stain a fence for the first time! 4′ tall, 227′ to cover, cedar. 4 months since install. How much product will I need and what is the best application?
When doing both sides, the sq. the footage comes to about 2000 sq feet. You will need about 15 gallons for one coat for new wood. Clean and brighten the wood for the prep with the Gemini Restore Kit. You will need about 3 of these kits. Best cost is the Combo Kits that we offer:
https://www.twpstain.com/twp-wood-stains-combo-kit-discounts
Apply with a stain brush or stain pad. Another option is to spray and back brush to ensure it is evenly applied. There will be some waster though if sprayed.
Thanks! Should I start with the 100 series or the 1500 series? I’m in Texas, so no limits concerning VOC’s. Could I switch to 1500 if I did 100 this time?
Use the 100 Series.
We installed a nice Cedar Fence in 2016. We used Thompson Waterproofing Stain (transparent for the panels and a color tinted stain for the post/railings). Within 6 months it was flaking and you graying. Obviously we chose a horrible product (after reading reviews we confirmed this). I have to get this taken care of before the fence gets ruined. Its a lot of fence and we had to budget for more stain and now we are ready. What would you suggest we do? Do we need to strip the old stain (whats left) off and start over or can we apply TWP on top of the Thompson? We live in Utah – what products would you suggest?
Yes, you will need to remove the Thompsons first. Try this: https://www.twpstain.com/restore-a-deck-stripper-brightener-kit-detail
Sand if needed after to remove any stubborn spots that do not strip off.
I have a 6ft tall cedar fence (300 ft long, so a total area of 3600 sq ft) that was installed about 7 months ago. It will be 2-3 months before the weather will allow me to stain it. The boards are all rough sawn, and were very wet when it was installed. The boards have faded and oxidized some.
Should I use the Gemini restore kit before staining? If I do two coats wet on wet, can I spray the first coat with an airless sprayer (without back brushing) and then do the second coat with the airless as long as I back brush it by hand?
I live in MN. Should I use TWP 100 since it is legal in MN, or is 1500 still a better product for a cedar fence?
Yes on prepping with the kit. Your application is also correct. Either series would well for this fence. No advantage to one over the other.
ill be applying a maintenance coat of twp 1500 after 10 years since the last to cedar siding, what advice do you have in terms of prep? and is using an airless the best application method? thanks!
Prep with the Gemini Restore Kit and pressure washing for the prep. If you apply the TWP with an ailress sprayer, you will need to back brush in the stain to ensure an even application.
[quote name=”William F.”]Hi, I’m cleaning and re-staining a cedar fence. This fence was originally staiedwith TWP series 100 about 10 years ago. As y’all are now recommending 1500 for fences, can I apply 1500 over 100, or should I stick with 100.[/quote]
You can use either series for the fence. Prep first with the Gemini Restore Kit.
Hi, I’m cleaning and re-staining a cedar fence. This fence was originally staiedwith TWP series 100 about 10 years ago. As y’all are now recommending 1500 for fences, can I apply 1500 over 100, or should I stick with 100.
[quote name=”4evr5″]My fence is kild dried cedar. 3 sides are rough sawn and 1 side smooth. In this case do I immediately stain the rough side with the TWP 100 and then wait a month for the smooth side to dry then use the Gemni Restore kit and then stain? What do you recommend?[/quote]
Best to do it all at once. Wait a month, lightly clean and brighten all but concentrating on the smooth side, let dry, and then stain.
My fence is kild dried cedar. 3 sides are rough sawn and 1 side smooth. In this case do I immediately stain the rough side with the TWP 100 and then wait a month for the smooth side to dry then use the Gemni Restore kit and then stain? What do you recommend?
[quote name=”4evr5″]Hi, we live in Lehi, UT and are having a Cedar Privacy fence put in. It is 160′ long and 6′ tall. The Cedar fence is using 7/8″ Kiln Dried Cedar.
Questions:
1) How long do I have to wait before I can stain this brand new fence?
2) What prep do I need to do before staining?
3) How many gallons do I need with 1,920 square feet of fence (160’longx6’highx2 sides)?
4) Which TWP stain would be best to use (I prefer a natural color with as little pigment as possible)?
5) I’ll be applying with a commercial pump sprayer – any tips for applying?
Thanks,
Michael[/quote]
1. If smooth kiln dried wood, wait a month. If rough sawn cut, you can stain now.
2. If smooth wood, use Gemini Restore Kit for the prep. Rough cut, no prep is needed as long as the wood is clean.
3. About 15-20 Gallons for 2 coats.
4. Use the Honeytone in the 100 Series.
5. Applying with a sprayer and back brush in the second coat “wet on wet”.
Hi, we live in Lehi, UT and are having a Cedar Privacy fence put in. It is 160′ long and 6′ tall. The Cedar fence is using 7/8″ Kiln Dried Cedar.
Questions:
1) How long do I have to wait before I can stain this brand new fence?
2) What prep do I need to do before staining?
3) How many gallons do I need with 1,920 square feet of fence (160’longx6’highx2 sides)?
4) Which TWP stain would be best to use (I prefer a natural color with as little pigment as possible)?
5) I’ll be applying with a commercial pump sprayer – any tips for applying?
Thanks,
Michael
[quote name=”DocPeter”]About 3 years ago I used Honeytone TWP 1500 stain on 64′ of new cedar fence. This still looks good, although darker (dirt/mold I guess).
Had to replace an additional 60′ of new cedar over weekend. Now I have 124′ of 6′ cedar, wanting it to look as even as possible.
What is your recommendation; clean old, stain a bit darker, etc.? Use 1500 again?
You did a wonderful job last time, TY.[/quote]
Prep all with the Gemini Restore Kit and stain with the same color and series would be the best way to do it.
About 3 years ago I used Honeytone TWP 1500 stain on 64′ of new cedar fence. This still looks good, although darker (dirt/mold I guess).
Had to replace an additional 60′ of new cedar over weekend. Now I have 124′ of 6′ cedar, wanting it to look as even as possible.
What is your recommendation; clean old, stain a bit darker, etc.? Use 1500 again?
You did a wonderful job last time, TY.
[quote name=”LaDonna”]I recently purchased a home with an older privacy fence that has turned gray with some rotten boards. What can I use to make the new boards and old boards the same finish? Do I need to use the restore first?[/quote]
Prep first. Use the Gemini Restore Kit and pressure washing to remove the gray. Once prepped and has dried for a couple of days, try the TWP 1500 or 100 Series.
I recently purchased a home with an older privacy fence that has turned gray with some rotten boards. What can I use to make the new boards and old boards the same finish? Do I need to use the restore first?
[quote name=”Sheila Wheelen”]Thanks for the info. Couple more quick questions:
Our usual rental place doesn’t rent their sprayers for oil based stain. What type of sprayer should we use, and is there a place that typically rents those types of sprayers.
Thanks again for the advice.[/quote]
TWP does not have to be applied with an airless spray. A good quality pump sprayer will work and you can buy those relatively inexpensively.
Thanks for the info. Couple more quick questions:
Our usual rental place doesn’t rent their sprayers for oil based stain. What type of sprayer should we use, and is there a place that typically rents those types of sprayers.
Thanks again for the advice.
[quote name=”Sheila Wheelen”]Hi. We live in Seattle, WA and have a cedar fence (330 SF) installed in late April this year. It’s now been three days since it last rained and it’s predicted to stay sunny/dry for three more days… which is rare for Washington state. We’re considering TWP 1500 semi-transparent stain. Want to retain natural cedar color, and we prefer a brown tint — not orange. Here are my questions:
1) What color TWP 1500 do you recommend?
2) There’s dirt on bottom and top rails left from installation. If we pressure wash today, can we start staining tomorrow?
3) Can we just use water to clean the fence since it’s relatively new?
4) Since TWP 1500 is an oil-based stain, will we have to strip it before reapplying every few years? We want to avoid that since we have such a large fence and we intend to stain both sides.
Thanks for your help!
Sheila[/quote]
1. Pecan or Dark Oak
2. Typically need 48 hours after prep to dry.
3. If it has oxidized/grayed then you should use a Deck Cleaner and Wood Brightener.
4. TWP 1500 can be cleaned and reapplied as needed. It does not have to be stripped.
Hi. We live in Seattle, WA and have a cedar fence (330 SF) installed in late April this year. It’s now been three days since it last rained and it’s predicted to stay sunny/dry for three more days… which is rare for Washington state. We’re considering TWP 1500 semi-transparent stain. Want to retain natural cedar color, and we prefer a brown tint — not orange. Here are my questions:
1) What color TWP 1500 do you recommend?
2) There’s dirt on bottom and top rails left from installation. If we pressure wash today, can we start staining tomorrow?
3) Can we just use water to clean the fence since it’s relatively new?
4) Since TWP 1500 is an oil-based stain, will we have to strip it before reapplying every few years? We want to avoid that since we have such a large fence and we intend to stain both sides.
Thanks for your help!
Sheila
[quote name=”Need some UV protect”]Hello. Just completed our first house project w/ pro install of a nice cedar split rail, and fencing wide picket cedar. We did not think about the importance of sealant though, and just rushed a heavy application of ThmpsnsClear w/ hand brush over everything a month after install before the rains. It’s beading properly and the fence looks awesome. The seal brought out rich tones and imperfections which all look great. However, I’m now reading that product scores low, is not durable, and has no UV protection. My question is: Can I just go over with a TWP clear to gain some UV protect? Should I wait a year then re apply? How should I handle this in order to get some UV protect, to stop the grey factor w/ cedar? We’re in N Denver CO, w/ baking hot summers. Please advise on best solution to sealing, having already made a poor product choice and just laid that seal on very heavy prior to some spring rains. My goal was lasting color, and I apparently chose the wrong product. Thanks.[/quote]
No. The TWP Clear does not have UV protection and you cannot apply this over the Thompsons without removing it first. Wait a year and use our Restore a Deck Stain stripper and pressure washer to remove. Apply the wood brightener. Stain with the TWP in a tinted color for UV protection.
Hello. Just completed our first house project w/ pro install of a nice cedar split rail, and fencing wide picket cedar. We did not think about the importance of sealant though, and just rushed a heavy application of ThmpsnsClear w/ hand brush over everything a month after install before the rains. It’s beading properly and the fence looks awesome. The seal brought out rich tones and imperfections which all look great. However, I’m now reading that product scores low, is not durable, and has no UV protection. My question is: Can I just go over with a TWP clear to gain some UV protect? Should I wait a year then re apply? How should I handle this in order to get some UV protect, to stop the grey factor w/ cedar? We’re in N Denver CO, w/ baking hot summers. Please advise on best solution to sealing, having already made a poor product choice and just laid that seal on very heavy prior to some spring rains. My goal was lasting color, and I apparently chose the wrong product. Thanks.
[quote name=”Carl kling”]I bought rough cut oak boards to build a new fence. Can I use your product for this project, and can I pre stain the wood before I install it. It is fresh cut from the mill about 2 months ago and it has been stored in my garage.[/quote]
If it is rough cut then yes you can stain now without the need for prepping or weathering.
I bought rough cut oak boards to build a new fence. Can I use your product for this project, and can I pre stain the wood before I install it. It is fresh cut from the mill about 2 months ago and it has been stored in my garage.
[quote name=”C. Gilliam”]Hello, I live in Mississippi. We put a new wood fence up in May, so it’s had about 5 months to dry out. I’d like to stain it in Oct or Nov. What are the proper temperature ranges the stain should be applied in? Also, should I use TWP 100 for this job?[/quote]
Yes on the 100 Series. Just one coat the first time. Prep with the Gemini Restore Kit. Temps are 50-85 degrees.
Hello, I live in Mississippi. We put a new wood fence up in May, so it’s had about 5 months to dry out. I’d like to stain it in Oct or Nov. What are the proper temperature ranges the stain should be applied in? Also, should I use TWP 100 for this job?
[quote name=”Teresa Baker”]Can I use an airless sprayer to apply the 1500 series to my fence, or should I stick with a garden sprayer?[/quote]
You can use either.
Can I use an airless sprayer to apply the 1500 series to my fence, or should I stick with a garden sprayer?
[quote name=”Tom Murphy”]I just finished TWP 1500 #1520 Pecan on a cedar fence. I got a sample from the paint store and the sample looked great but when I stained the fence the fence now looks orange.. The sample they gave me was more brown tone. Is the anything I can do to get rid of the orange look. Thanks[/quote]
You could remove and start over. You could apply a darker color 6-12 months later.
I just finished TWP 1500 #1520 Pecan on a cedar fence. I got a sample from the paint store and the sample looked great but when I stained the fence the fence now looks orange.. The sample they gave me was more brown tone. Is the anything I can do to get rid of the orange look. Thanks
[quote name=”Rick Cody”]bought some TWP1500 last summer for a cedar deck. Prepped deck according to instructions — twice. Deck was built in June and stained in late September while the weather was still dry. Stain was not absorbed into the wood as shown in videos.
Now have to re-stain the deck after about 8 months. NOT HAPPY WITH THIS STAIN. Am I doing something wrong?[/quote]
If you prepped correctly and the stain did not absorb then it was over applied. TWP is a penetrating oil but if the stain cannot absorb then it is due one of a few things. Wood was not ready, wood was wet, wood was not prepped correctly, it was over applied. You are also supposed to wait 4-12 months for the wood to dry out and it seems you may not have. Please read this for more info: http://www.twpstainhelp.com/prepping-new-wood-for-twp-stains/
bought some TWP1500 last summer for a cedar deck. Prepped deck according to instructions — twice. Deck was built in June and stained in late September while the weather was still dry. Stain was not absorbed into the wood as shown in videos.
Now have to re-stain the deck after about 8 months. NOT HAPPY WITH THIS STAIN. Am I doing something wrong?
[quote name=”Lester Flanigan”][quote name=”TheSealerStore”][quote name=”Lester Flanigan”]I have a multi-level fence with 145 linear feet at 4′ tall and 159 linear feet at 6’tall (304 total). How much do I need? Also, I live in Northwest Florida. Can I use the 1500? It does stay humid in the summer but it gets cold in the winter as well (26 degrees today). Will I have issues if I use the oil based stain here?[/quote]
Please send a total sq. footage. Length x height and are you doing both sides of the fence? If so then you need to double.[/quote]
The total square footage will be 3,068. How much will I need and what series of stain will I need based on the above comments? Thanks[/quote]
Use the 1500 Series. It works very well for verticals in your climate. For your sq. footage you will need 20-30 gallons of stain. Coverage varies on the age of the wood and the application. This is for two coats applied “wet on wet”. Make sure to prep the wood correctly as well.
[quote name=”TheSealerStore”][quote name=”Lester Flanigan”]I have a multi-level fence with 145 linear feet at 4′ tall and 159 linear feet at 6’tall (304 total). How much do I need? Also, I live in Northwest Florida. Can I use the 1500? It does stay humid in the summer but it gets cold in the winter as well (26 degrees today). Will I have issues if I use the oil based stain here?[/quote]
Please send a total sq. footage. Length x height and are you doing both sides of the fence? If so they you need to double.[/quote]
The total square footage will be 3,068. How much will I need and what series of stain will I need based on the above comments? Thanks
[quote name=”Lester Flanigan”]I have a multi-level fence with 145 linear feet at 4′ tall and 159 linear feet at 6’tall (304 total). How much do I need? Also, I live in Northwest Florida. Can I use the 1500? It does stay humid in the summer but it gets cold in the winter as well (26 degrees today). Will I have issues if I use the oil based stain here?[/quote]
Please send a total sq. footage. Length x height and are you doing both sides of the fence? If so they you need to double.
I have a multi-level fence with 145 linear feet at 4′ tall and 159 linear feet at 6’tall (304 total). How much do I need? Also, I live in Northwest Florida. Can I use the 1500? It does stay humid in the summer but it gets cold in the winter as well (26 degrees today). Will I have issues if I use the oil based stain here?
[quote name=”Dan rogers”]I have 200 linear feet 6′ tall of cedar fence to stain so 2400 sq ft. What stain do you recommend and how much do I need. I live in oak lawn Illinois[/quote]
For IL you need the 1500. For 2 coats you would need about 20-25 gallons.
I have 200 linear feet 6′ tall of cedar fence to stain so 2400 sq ft. What stain do you recommend and how much do I need. I live in oak lawn Illinois
[quote name=”Kathy Lachel”]Is the 100 or 1500 series of stains similar to Forest Service Oil, which I have used in the past? Also, is your product available at a dealer or do you only ship your products?[/quote]
TWP 100 and 1500 are oil best wood preservative stains. Never heard of Forest Service Oil. We ship products from this website.
Is the 100 or 1500 series of stains similar to Forest Service Oil, which I have used in the past? Also, is your product available at a dealer or do you only ship your products?
[quote name=”Cory Winters”]I have a pre treated cedar fence that needs to be revitalized if I pressure wash it will it take the treatment off and do I need to restain it[/quote]
Yes you will need to restain.
I have a pre treated cedar fence that needs to be revitalized if I pressure wash it will it take the treatment off and do I need to restain it
[quote name=”michael filkovich”]I have a fence that was previously stained and needs to be re-finished. The fence is 6′ x 100′ and will need to be stained on both sides. What products and how much would I need to re-do the fence. I believe that I used the 500 series originally. Do I need to power wash?
Do I need to apply something before staining?[/quote]
Yes the Gemini Restore Kit and pressure washing for the prep. Stain with the 1500 Series for the fence. You will need about 10-15 Gallons for the 2 coats.
I have a fence that was previously stained and needs to be re-finished. The fence is 6′ x 100′ and will need to be stained on both sides. What products and how much would I need to re-do the fence. I believe that I used the 500 series originally. Do I need to power wash?
Do I need to apply something before staining?
Please read:
http://www.twpstainhelp.com/prepping-new-wood-for-twp-stains/
Putting up redwood fence now and some of the boards are wet. Temp is about 80 degrees and dry. Only need to stain 1 side. How long should I wait before staining with semi-tranparent?
[quote name=”Steve412″]Is it alright to use TWP 1500 to maintain a cedar deck originally stained with TWP 100? Will the deck need to be stripped? Will there be coloring issues?
Thanks, Steve[/quote]
Yes as long as it is prepped correctly. I would use the Restore A Deck stripper and brightener for the prep.
Is it alright to use TWP 1500 to maintain a cedar deck originally stained with TWP 100? Will the deck need to be stripped? Will there be coloring issues?
Thanks, Steve