TWP 200 Series is now available to be shipped to Canada!
The TWP 200 Series was designed for shakes and shingles but can be used for all exterior wood surfaces such as fencing, log homes, cedar framed homes, etc.
TWP 200 Series is a semi-transparent oil based penetrating finish designed to extend the life of exterior wood such as cedar shake siding, and shingles. Containing a paraffin oil, TWP 200 series penetrates wood extremely well. The Paraffin oil is a “non-drying” oil that enhances the wood cells structural stability. This greatly improves the woods life and appearance.
TWP 200 Series primary function is to enhance the structural integrity and appearance of aged roofing. The finish composition will minimize grain cracking, cupping, surface erosion, water absorption and surface attack from mildew and algae. Although the system is highly penetrative, the residual surface film is highly resistant to destructive organisms. The penetrative portion of the product absorbs into aged and porous wood, adding bulk to aged and brittle wood fiber. This restores lubricity and flexibility to brittle shingles. At 94%+ solids, these products comply with all current federal and state VOC (volatile organic compounds) regulations.
TWP 200 SERIES will not crack, peel or blister making maintenance an easy task to perform for extended wood protection.
- Compliant in all States
- Sheds and Repels Water
- Prolongs UV Fading
- 8 Colors. Can take up to 30 days to cure to final color.
Material Preparation:
Due to different substrates, wood density, sanding, wiping and application methods, and atmospheric conditions, ALWAYS check actual stain color for accuracy before finish work process begins. We are not responsible for color variances following application of the product.
**TWP® 200 Clear allows wood to gray naturally
Can you use an airless sprayer on TWP 200?
Yes. 😀
Hi,
We have a spruce deck around 500ft2, sienna pressure treated but has aged for a couple years. What would the coverage be on a 5 gallon pail for something like this?
A 5-gallon will cover about 500 sq feet for the 2 coats.
What type of roller would you recommend for wood siding on a house? Thanks!
Do not use a roller. Stain pad or brush: https://www.twpstain.com/wood-and-deck-stains/application-tools/brushes-stain-pads
I am in California and have been told i can use the 200 series. Can it Be used on tongue and groove cedar siding? If so can I get samples of the 201 and the 203?
Yes and yes: https://www.twpstain.com/stain-samples
I have a 250ft of 6ft cedar fence to stain. I am wonder how much product would I need for that?
I can’t seem to find how much coverage a 5 gallon bucket covers.
What is the total square footage added up for both sides?
I have a house with Cedar shakes. The roof is approximately 8 years old. The area of the roof is approximately 1100 square feet. How much of the clear TWP 200 should I order? The roof is clean and hasn’t been treated before. I live in Upstate New York and have snowy winters. Should I use Storm Shield instead?
Use the TWP 200 Series for cedar shakes. You will need about 10 gallons for this.
Looking for sun protection on vertical deck support columns (only). They are whole rough-peeled logs, PT, installed in 2000 on the central Oregon coast (direct ocean exposure). The PT is the older green variety, which had minimal penetration. Columns have been treated once with a brown Behr product made for PT wood. They came out a dark brown but are now fading. I have not seen the Behr product on the market for some time. Finish texture is not a concern. 1) Can one of your products be applied directly to our columns? 2) what is the drying time for your products?
1. You must remove the Behr first. Strip and or sand. Brightener after.
3. 4-12 hours.
Pressure wash the PT first, then stain. I used this on my PT deck last year, it looks great and really seems to shed water. I’ll post some pictures in the morning. Also used on my new cedar shingle roof, they look brand new after the first winter. Very happy with TWP!
Drew,
Exactly what I had planned to do. There is no way to remove all of the older Behr product on the rough peeled logs with their crevices & cracks.
You can remove the Behr. Post some pics in the comments for help with this.
We’re in 100 Mile House in BC, Canada. Cold winters and hot summers. We have a large deck (pressure treated wood) and a 1000 sq ft western red cedar panabode cabin. The old stain needs to be removed from the cabin, I’m assuming cleaned with your brightener and then would the TWP 200 series be the best option for the deck and cabin logs? If we went with clear, I understand that higher tint means better UV protection, if we’re fine with the greying though that takes place will the clear still provide protection from the elements like the others (other than the fact that it will grey), 207 butternut brown would be our other choice.
You have to Strip and Brighten to remove this stain, not clean. You will need this kit and pressure washing:
https://www.twpstain.com/restore-a-deck-stripper-brightener-kit-detail
with both additives for the stripper:
https://www.twpstain.com/wood-stain-strippers/rad-stripper-additives
Get the Butternut Brown, it will last much longer.
Thank you!
When I say clean I should’ve clarified that I meant I was gonna sand the whole of the exterior down. In that case if it’s all removed would I just use the brightener prior to the stain? After a few years can I just redo the stain or must I strip everything again and redo it?
If you remove all the stain by sanding then yes, brighen all wood after. Clean and brighten when time to redo.
This says for vertical surfaces, just confirming it can be used for horizontal decking with foot traffic in Canada with extreme weather and is UV stable even with the clear?
Or is another product ideal for this application in this part of Canada.
Yes, you can use it on a deck in Canada. This is the correct product for Canada. Note, it can take 1-2 weeks for the final color to set when using the 200 Series.
Can I order samples?
https://www.twpstain.com/stain-samples
Is this the best option of your products for a log home in central NY? Needs to prevent water and wood boring insects. Thanks
Use the TWP 1500 Series: https://www.twpstain.com/twp-1500-series
Do you ship the Twp 1501 cedartone low Voc to Canada? Or do I order the 201 cedartone?
200 Series only for Canada.
What is the shipping cost to Tiny, Ontario L0K 2E1 Canada. Thanks.
Please add products to the cart and enter your shipping info there. It will update with the total cost.
Is there a big difference between cedar gold and california cedar. The house exterior is cedar and the deck is sienna pressure treated.
Can I apply twp200 directly on my cedar shingles which were previously (over 5 years ago) treated with sikkens citol srd?
You have to remove the Sikkens when switching to another brand of stain. Strip and brighten for prep.