Make Restoring Your Exterior Wood …Easy!
Restore-A-Deck Cleaner and Brightener system is a powerful “eco-friendly” two-part restoration system.
Step 1 Wood and Deck Cleaner that deeply cleans your wood to remove dirt, grime, mold, algae and general graying. The cleaner will help prep neglected wood and or prep for re-coating with a wood or deck stain.
Step 2 Wood Brightener is used after the wood cleaner to “brighten” the wood while neutralizing the cleaner to a natural pH balance. This step will improve the overall appearance of your wood while helping the wood deck stain longevity.
100% Biodegradable product- Concentrated powder formula – Cleans up to 1000 sq. feet!
- Prep wood surfaces for re-coating with a wood or deck stain
- Restores weathered gray wood to natural color
- Eco-friendly
The contractor that stained our deck (used TWP) got some on our vinyl siding. They were able to get it off of floor level siding by detaching the siding and working it with Goof Off. Stain on the wall of the house where it meets the deck is still there. The siding is somewhat textured and the stain has settled into the recesses. Nothing we have tried is getting it off. Any ideas?
The contractor that stained our deck (used TWP) got some on our vinyl siding. They were able to get it off of floor level siding by detaching the siding and working it with Goof Off. Stain on the wall of the house where it meets the deck is still there. The siding is somewhat textured and the stain has settled into the recesses. Nothing we have tried is getting it off. Any ideas?
[quote name=”pcarriere”]Hi, I need to put some stain on my cedar siding because some areas start to have bare wood exposed. The stain used before was TWP 1500. How do I prep the surface without removing old stain, I just want to add on it. On another side of the house, mildew need to be remove, will the stain be remove as well? Is this a different prep than siding that just need to add stain?
>Thanks[/quote]
Siding is the same prep as decking. Best to use the Gemini Restore Kit for prep and pressure washing. See here for more info on our help site: http://www.twpstainhelp.com/tips/prepping-for-twp-stains/maintaining-twp/
Hi, I need to put some stain on my cedar siding because some areas start to have bare wood exposed. The stain used before was TWP 1500. How do I prep the surface without removing old stain, I just want to add on it. On another side of the house, mildew need to be remove, will the stain be remove as well? Is this a different prep than siding that just need to add stain?
>Thanks
[quote name=”kylev75″][quote name=”TheSealerStore”][quote name=”kylev75″][quote name=”TheSealerStore”][quote name=”kylev75″]I have a newer(3years old) pressure treated deck, never cleaned or sealed. I started cleaning the deck (starting with the railings and spindles) with the cleaner sold here. etc…quote]
This happens when you are moving a heavy layer of oxidized wood cells. Typically on decks that are left unstained for 1+ years. Yes you can lightly sand or buff to remove the fuzzies, then brighten.[/quote]
What grit sandpaper would you suggest[/quote]
60-80 grit at most.[/quote]
I noticed on cleaning/stripping/brightening how-to the brightener section said to apply immediately after cleaning and “do not let the wood dry”. I had to let it dry so I could sand away the fuzz. Should I wet the deck before adding the brightener? It’s a large deck, 20×30 +stairs and rails, should I brighten in sections. and keep it damp the same way I did for the cleaner?[/quote]
Just lightly wet the deck and brighten all at once.
[quote name=”TheSealerStore”][quote name=”kylev75″][quote name=”TheSealerStore”][quote name=”kylev75″]I have a newer(3years old) pressure treated deck, never cleaned or sealed. I started cleaning the deck (starting with the railings and spindles) with the cleaner sold here. etc…quote]
This happens when you are moving a heavy layer of oxidized wood cells. Typically on decks that are left unstained for 1+ years. Yes you can lightly sand or buff to remove the fuzzies, then brighten.[/quote]
What grit sandpaper would you suggest[/quote]
60-80 grit at most.[/quote]
I noticed on cleaning/stripping/brightening how-to the brightener section said to apply immediately after cleaning and “do not let the wood dry”. I had to let it dry so I could sand away the fuzz. Should I wet the deck before adding the brightener? It’s a large deck, 20×30 +stairs and rails, should I brighten in sections. and keep it damp the same way I did for the cleaner?
[quote name=”antonio giraldez”]i have a 2 year cedar deck treated with twp last year.
it has now some parts dirty with black spots from leaves.
what should i do before putting another coat? restore? powerwash? scrub? sand? just reaply anothrer coat?
thanks[/quote]
Prep with a deck cleaner and lightly pressure wash for prep before applying a light coat of the TWP.
i have a 2 year cedar deck treated with twp last year.
it has now some parts dirty with black spots from leaves.
what should i do before putting another coat? restore? powerwash? scrub? sand? just reaply anothrer coat?
thanks
[quote name=”larry nore”]I have used the product on my year old cedar deck, Question. when I applied the product I let it sit for the 15 minutes and then power washed it and wheni would step on it it would leave my boot print in wood so I applied again and used a brush and the stuff came off like snot. then power washed again and did it again and then it seemed the wood was clean. Is this the way it is suppose to work??? I am very stiff today after that workout.[/quote]
it sounds like you are removing a heavy layer of oxidized wood cells. It looks like pulp. Just pressure was and rinse well. It should come very clean.
[quote name=”kylev75″][quote name=”TheSealerStore”][quote name=”kylev75″]I have a newer(3years old) pressure treated deck, never cleaned or sealed. I started cleaning the deck (starting with the railings and spindles) with the cleaner sold here. It has left behind a fuzzy look. Should I lightly sand the deck before I use the brightener, or do you recommend another solution. Located in NE Ohio.[/quote]
This happens when you are moving a heavy layer of oxidized wood cells. Typically on decks that are left unstained for 1+ years. Yes you can lightly sand or buff to remove the fuzzies, then brighten.[/quote]
What grit sandpaper would you suggest[/quote]
60-80 grit at most.
I have used the product on my year old cedar deck, Question. when I applied the product I let it sit for the 15 minutes and then power washed it and wheni would step on it it would leave my boot print in wood so I applied again and used a brush and the stuff came off like snot. then power washed again and did it again and then it seemed the wood was clean. Is this the way it is suppose to work??? I am very stiff today after that workout.
[quote name=”TheSealerStore”][quote name=”kylev75″]I have a newer(3years old) pressure treated deck, never cleaned or sealed. I started cleaning the deck (starting with the railings and spindles) with the cleaner sold here. It has left behind a fuzzy look. Should I lightly sand the deck before I use the brightener, or do you recommend another solution. Located in NE Ohio.[/quote]
This happens when you are moving a heavy layer of oxidized wood cells. Typically on decks that are left unstained for 1+ years. Yes you can lightly sand or buff to remove the fuzzies, then brighten.[/quote]
What grit sandpaper would you suggest
[quote name=”kylev75″]I have a newer(3years old) pressure treated deck, never cleaned or sealed. I started cleaning the deck (starting with the railings and spindles) with the cleaner sold here. It has left behind a fuzzy look. Should I lightly sand the deck before I use the brightener, or do you recommend another solution. Located in NE Ohio.[/quote]
This happens when you are moving a heavy layer of oxidized wood cells. Typically on decks that are left unstained for 1+ years. Yes you can lightly sand or buff to remove the fuzzies, then brighten.
I have a newer(3years old) pressure treated deck, never cleaned or sealed. I started cleaning the deck (starting with the railings and spindles) with the cleaner sold here. It has left behind a fuzzy look. Should I lightly sand the deck before I use the brightener, or do you recommend another solution. Located in NE Ohio.
[quote name=”dennisellis”]My pressure treated wood is ~5 months old. Doesn’t look gray or in bad shape at all. I know it needs to be cleaned but do I need Restore A Deck or can I just use normal household cleaners? Same question about the brightener. Since the wood is so new do I need it?[/quote]
Yes you need to it remove mill glaze, dirt, and any oxidation of the wood cells.
My pressure treated wood is ~5 months old. Doesn’t look gray or in bad shape at all. I know it needs to be cleaned but do I need Restore A Deck or can I just use normal household cleaners? Same question about the brightener. Since the wood is so new do I need it?
[quote name=”William A”]Will the Gemini Restore-A-Deck Kit kill my grass?[/quote]
Not is is eco friendly.
Will the Gemini Restore-A-Deck Kit kill my grass?
[quote name=”Marcia”]Do you recommend Restore-a deck and/or TWP stain for older wood shingles? They have been coated only with a preservative previously and are weathered in places.
Thanks[/quote]
Yes, prep first with the Gemini Restore Kit before applying the TWP.
[quote name=”Marcia”]Do you recommend Restore-a deck and/or TWP stain for older wood shingles? They have been coated only with a preservative previously and are weathered in places.
Thanks[/quote]
Yes, prep first with the Gemini Restore Kit before applying the TWP.
Do you recommend Restore-a deck and/or TWP stain for older wood shingles? They have been coated only with a preservative previously and are weathered in places.
Thanks
[quote name=”tom lloyd”]I live in North Idaho on Lake Pend Oreille and have a brand new Cedar 800 sq ft deck. Since we are approved for either TWP 100 or 1500, which do you recommend and why?[/quote]
See this about new wood:
http://www.twpstainhelp.com/prepping-new-wood-for-twp-stains/
Use the TWP 100 Series.
I live in North Idaho on Lake Pend Oreille and have a brand new Cedar 800 sq ft deck. Since we are approved for either TWP 100 or 1500, which do you recommend and why?
[quote name=”elkin2228″]I stained my new PT pine deck in the Spring, 2014 with 2 coats of TWP 1500. I followed all your instructions including, first cleaning with your Gemini Restore-A-Deck Kit. Now that 2 years have passed, it may be time to apply another coat as the rain no longer beads-up as before. But before I do, will it be necessary to apply the Gemini product again or is it OK to just apply the new coat over the old one?[/quote]
Isn it has been two year you should prep with the Gemini Restore kit. We forwarded your order to you from 2014. it was Cedartone 1501.
Do you keep a record of purchases made by customers like myself? I purchased your stain in 2014 and I am planning on re-staining my deck this spring, with the same type and color. But I cannot recall what exact product I purchased. Is that something you keep record of?
[quote name=”John LeBas”]I have a treated wood (pine) deck in the Texas Hill country. I don’t think it was ever sealed or stained. About half is more or less covered, and the half not covered shows more degradation from the sun and rain. What products should I use to clean and stain/seal it? I’s about 840 ft^2tyotal. Also, it is elevated above a lower concrete deck. Should I clean and stain/seal the underside?[/quote]
Use the Gemini Restore Kit and pressure washing for the prep. Stain with the TWP 100 or 1500 Series. You can do the undersides if you like.
[quote name=”Tom Scharf”]I applied 2 coats of twp 1530 last season on a cedar deck . The deck still looks good but I would like to put another coat this season .what prep work do i need to do before I coat it again and will I need to do the 2 coat wet on wet again or will 1 coat be sufficient.[/quote]
Lightly wash to remove any dirt but not the coatings from last year. Just apply one light coat of the TWP.
I have a treated wood (pine) deck in the Texas Hill country. I don’t think it was ever sealed or stained. About half is more or less covered, and the half not covered shows more degradation from the sun and rain. What products should I use to clean and stain/seal it? I’s about 840 ft^2tyotal. Also, it is elevated above a lower concrete deck. Should I clean and stain/seal the underside?
[quote name=”Patricia Heacock”]I applied 2 coats of TWP 100 on my deck. It now has black discoloration on it. I plan to put another coat on it this spring. Do I need one or 2 kits for a 60×20 ft. deck. Thanks.[/quote]
For 1200 sq. feet yo would need two kits.
I applied 2 coats of TWP 100 on my deck. It now has black discoloration on it. I plan to put another coat on it this spring. Do I need one or 2 kits for a 60×20 ft. deck. Thanks.
[quote name=”foofielol”]I used twp rustic four year ago on my wood deck. Some of my boards have areas with no stain left at all while others still have stain on them – all within the same board. I know I am way overdue for another coat. Will your restore product be enough so my new coat will be consistent or do I need to pressure wash everything off down to raw wood?[/quote]
At this point it would be best to use the the Restore A Deck Stripper followed by the brightener for the prep.
I used twp rustic four year ago on my wood deck. Some of my boards have areas with no stain left at all while others still have stain on them – all within the same board. I know I am way overdue for another coat. Will your restore product be enough so my new coat will be consistent or do I need to pressure wash everything off down to raw wood?
[quote name=”Joshua Lee”]Hi, I stained my 8 ft by 35 ft deck in 2015. It still looks fine but I want it to look brand new again! First, how should I prepare the wood? Second, how nany gallons would I need to apply the maitanence coat?[/quote]
Yes the Gemini Kit for prep and apply one coat. 2 gallons should work.
[quote name=”Sheila L”]When do you know to strip wood that previously stained or will a cleaner and brightener be sufficient?Previous olympic toner applied over 2 years ago, water does not bead over deck and siding.[/quote]
If you are switching to TWP from a different brand then you will need to use the RAD Stripper and RAD brightener.
When do you know to strip wood that previously stained or will a cleaner and brightener be sufficient?Previous olympic toner applied over 2 years ago, water does not bead over deck and siding.
[quote name=”ErikO”]It looks like I got a little heavy handed with the pressure washer during the cleaning phase and gave the wood a “fuzzy” or fiberglass-like appearance in some spots. Should this be a concern before staining and if so, what would be my next step.
Thank you.[/quote]
Try and lightly sanding the floors to remove the raised wood fuzzies.
It looks like I got a little heavy handed with the pressure washer during the cleaning phase and gave the wood a “fuzzy” or fiberglass-like appearance in some spots. Should this be a concern before staining and if so, what would be my next step.
Thank you.
[quote name=”Harold TenBrink”]I noticed that your instructions indicate a wet on wet application for a second coat, however I also noted in your instructions that a second coat is not required on a new pine wood deck? I am some what confused as to if I need to perform a “wet on wet” application on a new deck or not. PS how do I determine the moisture content of the wood on the deck? My deck is at present, 4 mos. old.[/quote]
Only one coat on new wood and please read this as well:
http://www.twpstainhelp.com/prepping-new-wood-for-twp-stains/
I noticed that your instructions indicate a wet on wet application for a second coat, however I also noted in your instructions that a second coat is not required on a new pine wood deck? I am some what confused as to if I need to perform a “wet on wet” application on a new deck or not. PS how do I determine the moisture content of the wood on the deck? My deck is at present, 4 mos. old.
[quote name=”pete busicchia”]is it necessary to strip the old stain off before re-staining? I previously used TWP 206. The verticals are in decent shape; its the flat surfaces that need the most work. I have been told that just light pressure washing would be sufficient. (don’t really trust where I got the information)
Thanks for your help[/quote]
If reapplying TWP then you do not need to strip but you should use the Gemini Restore Kit to clean and brighten.
[quote name=”js395″]I live in coastal SE Virginia. I have a new deck that has seasoned for about 6 month now. Looking to stain. What prep do I need to do and what stain should I use.
Thanks[/quote]
Use the TWP 100 Series for your area and prep with the Gemini Restore Kit. See this article for more info on new wood:
http://www.twpstainhelp.com/prepping-new-wood-for-twp-stains/
is it necessary to strip the old stain off before re-staining? I previously used TWP 206. The verticals are in decent shape; its the flat surfaces that need the most work. I have been told that just light pressure washing would be sufficient. (don’t really trust where I got the information)
Thanks for your help
I live in coastal SE Virginia. I have a new deck that has seasoned for about 6 month now. Looking to stain. What prep do I need to do and what stain should I use.
Thanks
[quote name=”Joe OBrien”]My redwood deck will be finished this week. When is the appropriate time to use RAD?[/quote]
See this about new wood:
http://www.twpstainhelp.com/prepping-new-wood-for-twp-stains/
My redwood deck will be finished this week. When is the appropriate time to use RAD?
[quote name=”Lise Boisvert”]Where can I buy this in Ontario Canada?[/quote]
Sorry but it is not sold in Canada.
Where can I buy this in Ontario Canada?
[quote name=”Barbara Walsh”]is this a stripper and cleaner in one?[/quote]
No this is a cleaner and brightener kit.
is this a stripper and cleaner in one?
[quote name=”Nancy Ashmore”]have an Indiana deck of pine (think treated) approx 20 yrs old. Looks like was painted with exterior house paint. How should one go about preparing this deck for stain- to remove paint,etc?? Am I correct to then use the 1500 series stain?[/quote]
Cleaners and or stain strippers will not remove a paint off a deck. You will have to power sand it all off. Once fully removed, it is helpful to use the Gemini Restore Kit for final prep. Use the 1500 Series for IN.