TWP 100 Stain

by Administrator

TWP 100 Series Deck Stain – The Best Deck Stain

TWP 100 StainNeed Help or Advice when using TWP 100 Stain?

TWP 100 Series Total Wood Protectant (TWP) Wood Deck Stain protects and prolongs all exterior woods, decks, and fences. TWP Wood Deck Stains and Sealers is a distinctive mixture of chemicals blended together to form a professional strength formula that preserves exterior wood surfaces in numerous ways. 

TWP 100 Series Stain will perform at its maximum potential when the wood is properly prepped and when the stain is properly applied. Unfortunately not all wood is in the same condition prior to applying the stain.

Order Now: TWP 100 Series

Do you have any questions about using the TWP 100 Wood and Deck Stain?

Please answer these few questions to achieve the best possible results with your TWP 100 Wood and Decking Stain.

  1. info buttonAge of wood?
  2. Type of wood?
  3. Condition of the wood?
  4. Has it been stained previously and if so with what brand of stain?
  5. Small description of the area to be treated.

Ask Questions in Comment Area Below

Subscribe
Notify of
guest
1.8K Comments
Inline Feedbacks
View all comments
TWP Stains Authorized Dealer
Admin
10 years ago

[quote name=”Damien”]I just had a pergola/gazebo built in my backyard with pressure treated pine about 4 weeks ago.
I have a couple questions:
1)Do I need to let the wood “cure”
2)the 6×6 posts are darker in color than the 2×6’s at the top so would I need a solid color stain to make it all match?
3)Do you sell solid stains?
4)Do you have a larger example of your colors than the small squares on the web page?
5)What do you recommend the twp100 or 1500?

Thanks, Damien[/quote]
We do not sell solid stains, only semi-transparent colors. Please read this about new wood: http://www.twpstainhelp.com/prepping-new-wood-for-twp-stains/

Damien
Damien
10 years ago

I just had a pergola/gazebo built in my backyard with pressure treated pine about 4 weeks ago.
I have a couple questions:
1)Do I need to let the wood “cure”
2)the 6×6 posts are darker in color than the 2×6’s at the top so would I need a solid color stain to make it all match?
3)Do you sell solid stains?
4)Do you have a larger example of your colors than the small squares on the web page?
5)What do you recommend the twp100 or 1500?

Thanks, Damien

TWP Stains Authorized Dealer
Admin
10 years ago

[quote name=”Ray Janisse”]I have used your product for years, specifically TWP 106 – Prairie Gray and cannot seem to locate it anywhere. Do you have any advice?[/quote]
You can order from our website and have it delivered.

Ray Janisse
Ray Janisse
10 years ago

I have used your product for years, specifically TWP 106 – Prairie Gray and cannot seem to locate it anywhere. Do you have any advice?

TWP Stains Authorized Dealer
Admin
10 years ago

[quote name=”William Farrell”]I have a 23 year old PT deck that has been stained numerous times with Sherwin Williams and Cabot grey solid and semisolid stain. It is on the back of the house in morning sun in MA.The wood is in good condition, I have had to take a thin kerf saw to increase the spaces between some boards as they have swollen and closed the gaps. I would like to clean it and put the appropriate TWP product on it. It is connected to a screen porch which has the same stain-currently solid- which needs only a touch up.[/quote]
I am sorry but you cannot use TWP over these products. You would have to remove them first completely by sanding them off.

William Farrell
William Farrell
10 years ago

I have a 23 year old PT deck that has been stained numerous times with Sherwin Williams and Cabot grey solid and semisolid stain. It is on the back of the house in morning sun in MA.The wood is in good condition, I have had to take a thin kerf saw to increase the spaces between some boards as they have swollen and closed the gaps. I would like to clean it and put the appropriate TWP product on it. It is connected to a screen porch which has the same stain-currently solid- which needs only a touch up.

TWP Stains Authorized Dealer
Admin
10 years ago

[quote name=”G. NIKITEAS”]I AM HAVEING A NEW CEDAR DECK INSTALLED. WHICH ONE OF YOUR PRODUCTS DO YOU RECOMMEND AND HOW SHOULD IT BE APPLIED?[/quote]
Please read: http://www.twpstainhelp.com/prepping-new-wood-for-twp-stains/

TWP Stains Authorized Dealer
Admin
10 years ago

[quote name=”Ed Slacum”]Just installed 400 foot redwood cedar deck. Off course is was dried from the mill. Installation was complete 2 weeks ago. It gets a lot of sun. What product is best, and should I sand first (60 grit?).[/quote]
Ed, please read this article about new wood: http://www.twpstainhelp.com/prepping-new-wood-for-twp-stains/

Ed Slacum
Ed Slacum
10 years ago

Just installed 400 foot redwood cedar deck. Off course is was dried from the mill. Installation was complete 2 weeks ago. It gets a lot of sun. What product is best, and should I sand first (60 grit?).

G. NIKITEAS
G. NIKITEAS
10 years ago

I AM HAVEING A NEW CEDAR DECK INSTALLED. WHICH ONE OF YOUR PRODUCTS DO YOU RECOMMEND AND HOW SHOULD IT BE APPLIED?

TWP Stains Authorized Dealer
Admin
10 years ago

[quote name=”Ty Morris”]I have a 7 year old covered deck that I put Twp 101 on a year after it was built it looks good but needs restained I am going to use TWP 101 again do I need to do anything but power wash it first thanks[/quote]
It would be best to use a deck cleaner with the pressure washing for the prep.

Ty Morris
Ty Morris
10 years ago

I have a 7 year old covered deck that I put Twp 101 on a year after it was built it looks good but needs restained I am going to use TWP 101 again do I need to do anything but power wash it first thanks

TWP Stains Authorized Dealer
Admin
10 years ago

[quote name=”david snyder”]1. How long (how many years) has twp stain 1500 series been produced?
2. Does 1500 honey colored stain contain any linseed oil?[/quote]
No linseed oil. 5 Years. It replaced the 500 Series.

david snyder
david snyder
10 years ago

1. How long (how many years) has twp stain 1500 series been produced?
2. Does 1500 honey colored stain contain any linseed oil?

TWP Stains Authorized Dealer
Admin
10 years ago

[quote name=”Jeff Whiteman”]What stain would you recommend for a 6 month old deck in Montana? I am looking for something that will keep the cedar from splintering but would like to allow the wood to grey if possible. If that is not possible to do with a clear stain, what stain would you recommend with the minimum amount of color?[/quote]The TWP 100 Clear will protect the wood while allowing the wood to gray naturally. This would be your best option. You can choose the clear in the options drop down when ordering.

Jeff Whiteman
Jeff Whiteman
10 years ago

What stain would you recommend for a 6 month old deck in Montana? I am looking for something that will keep the cedar from splintering but would like to allow the wood to grey if possible. If that is not possible to do with a clear stain, what stain would you recommend with the minimum amount of color?

TWP Stains Authorized Dealer
Admin
10 years ago

[quote name=”Laszlo Jakoi”]age of wood : new
type of wood :thermal treated ash
condition of wood : new
no stain
18 X 15[/quote]
Please read:
http://www.twpstainhelp.com/prepping-new-wood-for-twp-stains/

Laszlo Jakoi
Laszlo Jakoi
10 years ago

age of wood : new
type of wood :thermal treated ash
condition of wood : new
no stain
18 X 15

TWP Stains Authorized Dealer
Admin
10 years ago

[quote name=”Ed Ames”]Need a new gallon can of 1500 just to finish up a project. How long will the remaining stain (about 90% of the can) be viable. Could I use it again in 2-3 years?[/quote]
Please read:
http://www.twpstainhelp.com/shelf-life-of-twp/

Ed Ames
Ed Ames
10 years ago

Need a new gallon can of 1500 just to finish up a project. How long will the remaining stain (about 90% of the can) be viable. Could I use it again in 2-3 years?

TWP Stains Authorized Dealer
Admin
10 years ago

[quote name=”hyoyasin”]1.Age of wood? [b]10 months[/b]
2.Type of wood? [b]Pressure Treated[/b]
3.Condition of the wood? [b]started Turning to gray
[/b]
4.Has it been stained previously and if so with what brand of stain? [b]never[/b]
5.Small description of the area to be treated. [b]Lower deck seems it is in better condition, but the upper deck turns to gray rapidly. deck is fully exposed to the sun in the morning to 2PM.[/b][/quote]
Prep first with Gemini Restore kit and pressure washing to restore color before using the TWP stain.

TWP Stains Authorized Dealer
Admin
10 years ago

[quote name=”Brenda Ablers”]We are installing new cedar decking. Since it is brand new wood, it is in excellent condition, but it does not absorb water (I assuming due to mill glaze). I would like to stain it with TWP 100 (I live in Missouri) as soon as possible so that it doesn’t turn gray. Please let me know the best way to determine when it will accept stain and the best way to prep it. We are installing it without prepping it in any way, is this an issue? Thanks for any and all advice you can send. I have been very confused by all of the info on the Internet and it seems a lot of it pertains to pressure treated and not cedar. THANKS![/quote]
Please read: http://www.twpstainhelp.com/prepping-new-wood-for-twp-stains/

compare TWP stains
10 years ago

1.Age of wood? [b]10 months[/b]
2.Type of wood? [b]Pressure Treated[/b]
3.Condition of the wood? [b]started Turning to gray
[/b]
4.Has it been stained previously and if so with what brand of stain? [b]never[/b]
5.Small description of the area to be treated. [b]Lower deck seems it is in better condition, but the upper deck turns to gray rapidly. deck is fully exposed to the sun in the morning to 2PM.[/b]

Brenda Ablers
Brenda Ablers
10 years ago

We are installing new cedar decking. Since it is brand new wood, it is in excellent condition, but it does not absorb water (I assuming due to mill glaze). I would like to stain it with TWP 100 (I live in Missouri) as soon as possible so that it doesn’t turn gray. Please let me know the best way to determine when it will accept stain and the best way to prep it. We are installing it without prepping it in any way, is this an issue? Thanks for any and all advice you can send. I have been very confused by all of the info on the Internet and it seems a lot of it pertains to pressure treated and not cedar. THANKS!

TWP Stains Authorized Dealer
Admin
10 years ago

[quote name=”Rick Bradley”]I live in colorado. I have a redwood deck that is about 25 yrs old. I flipped the boards over and sanded down thru the uv grey to the redwood surface. I’ve heard that TWP 100 is the correct stain to use. Do I need to prep the surface before I apply the TWP 100? If I apply the penetrating stain will it look “blotchy?” My preference is a semi-transparent stain. I have a 16′ x 20′ ft. Deck and am thinking 2 gals. Should cover it. How do I go about getting a small sample from you to test it? Also, are there any local dealers near Ft. Collins, Co.? I look forward to hearing from you. Rick[/quote]
Samples are on the website to test.
http://www.twpstain.com/stain-samples

You will need to prep after the sanding with the Gemini Restore Kit. You will need 2-3 gallons for the deck, more if you have railings and steps.

Rick Bradley
Rick Bradley
10 years ago

I live in colorado. I have a redwood deck that is about 25 yrs old. I flipped the boards over and sanded down thru the uv grey to the redwood surface. I’ve heard that TWP 100 is the correct stain to use. Do I need to prep the surface before I apply the TWP 100? If I apply the penetrating stain will it look “blotchy?” My preference is a semi-transparent stain. I have a 16′ x 20′ ft. Deck and am thinking 2 gals. Should cover it. How do I go about getting a small sample from you to test it? Also, are there any local dealers near Ft. Collins, Co.? I look forward to hearing from you. Rick

TWP Stains Authorized Dealer
Admin
10 years ago

[quote name=”Richard Forstot”]I had a new deck built in May. We’ve had a very dry summer. Would it be okay to clean, brighten, and apply TWP to a four month old deck with pressure treated pine?[/quote]
Yes you should be good to go. Only one coat of the TWP.

Richard Forstot
Richard Forstot
10 years ago

I had a new deck built in May. We’ve had a very dry summer. Would it be okay to clean, brighten, and apply TWP to a four month old deck with pressure treated pine?

TWP Stains Authorized Dealer
Admin
10 years ago

[quote name=”John Moseley”]I have a cedar-sided house that was stained a dark chocolate brown. I’m guessing previous owner didnt prep before staining, because power spraying instantly revealed a wonderful light brown wood color underneath with woodgrain. My question is whether you offer a clear stain that would allow me to preserve the natural wood color that is now showing.[/quote]
We have clear but clear does not have UV protection from graying. You need to have color in the TWP for this.

TWP Stains Authorized Dealer
Admin
10 years ago

[quote name=”Tracie”]Hi! My deck is cedar and approximately 10 years old. I have been using Olympic Maximum semi-transparent stain on it. Last application was about 2 years ago. I live in Atlanta, GA. Deck is covered, but stairs are not. Would you recommend TWP 100 or 1500? Can I use Gemini deck cleaner and brightener, or just stripper. Deck was just pressure washed by house painter, but I’m trying to decide on a stain. Thanks so much!![/quote]
You need to remove the Olympic so best to use the stripper and then the brightener after to neutralize.

TWP Stains Authorized Dealer
Admin
10 years ago

[quote name=”kls1973″]Do you just use mineral spirits for the cleanup of equipment after staining? Thank you![/quote]
Yes.

John Moseley
John Moseley
10 years ago

I have a cedar-sided house that was stained a dark chocolate brown. I’m guessing previous owner didnt prep before staining, because power spraying instantly revealed a wonderful light brown wood color underneath with woodgrain. My question is whether you offer a clear stain that would allow me to preserve the natural wood color that is now showing.

Tracie
Tracie
10 years ago

Hi! My deck is cedar and approximately 10 years old. I have been using Olympic Maximum semi-transparent stain on it. Last application was about 2 years ago. I live in Atlanta, GA. Deck is covered, but stairs are not. Would you recommend TWP 100 or 1500? Can I use Gemini deck cleaner and brightener, or just stripper. Deck was just pressure washed by house painter, but I’m trying to decide on a stain. Thanks so much!!

kls1973
kls1973
10 years ago

Do you just use mineral spirits for the cleanup of equipment after staining? Thank you!

TWP Stains Authorized Dealer
Admin
10 years ago

[quote name=”Edward Marr”]My deck is 25 years old, pressure treated pine and structurally sound. Treated 4 years ago with Olympic semi transparent, 4 years before that with Behr Semi. I have cleaned it with Olympic premium cleaner & pressure washed it. Old stains remain in variable amounts from 80% coverage but most is less than 20% covered to bare wood. I should have stripped it. I like the light color to show through and don’t care that it will be uneven coverage. I have decided to use brightener, stain it with a light tint TWP stain and live with it until the next staining 3 years from now and see if I want to strip it then. Which TWP stain should I use – 100, 1500 or something else. Can I buy TWP brightener and not the cleaner since I have already cleaned it.[/quote]
You should not apply the TWP over the old stain. You need to strip now.

Edward Marr
Edward Marr
10 years ago

My deck is 25 years old, pressure treated pine and structurally sound. Treated 4 years ago with Olympic semi transparent, 4 years before that with Behr Semi. I have cleaned it with Olympic premium cleaner & pressure washed it. Old stains remain in variable amounts from 80% coverage but most is less than 20% covered to bare wood. I should have stripped it. I like the light color to show through and don’t care that it will be uneven coverage. I have decided to use brightener, stain it with a light tint TWP stain and live with it until the next staining 3 years from now and see if I want to strip it then. Which TWP stain should I use – 100, 1500 or something else. Can I buy TWP brightener and not the cleaner since I have already cleaned it.

TWP Stains Authorized Dealer
Admin
10 years ago

[quote name=”Judy Redard”]My husband, Randy, and I are putting down new cedar wood for our deck. What stain do you recommend we use and how to use it? Any preparations?
Thank you![/quote]
Please read this:
http://www.twpstainhelp.com/prepping-new-wood-for-twp-stains/

Judy Redard
Judy Redard
10 years ago

My husband, Randy, and I are putting down new cedar wood for our deck. What stain do you recommend we use and how to use it? Any preparations?
Thank you!

TWP Stains Authorized Dealer
Admin
10 years ago

[quote name=”Frank Ongaro”]My fence is 5 months old pressure treated pine. I plan to use TWP 100 cedartone. I live in Tennessee. The fence is starting to gray in some places. The bottom of the boards have dirt splashed up from rain. Do I need to use brightner and cleaner before applying stain. If so, does it need to be rinsed off and then how long do I have to wait before staining. When applying stain how long before it dries ( do I need to be concerned about rain in the forecast for the following day). I have about 325 feet of fence. Also, how many coats of stain?[/quote]
Yes you need the Gemini Restore Kit and a pressure washer for the prep with this. After the prep you wait 48 hours to stain. Dries in 4-8 hours. Two coats applied wet on wet application:
http://www.twpstainhelp.com/tips/application-instructions/

Frank Ongaro
Frank Ongaro
10 years ago

My fence is 5 months old pressure treated pine. I plan to use TWP 100 cedartone. I live in Tennessee. The fence is starting to gray in some places. The bottom of the boards have dirt splashed up from rain. Do I need to use brightner and cleaner before applying stain. If so, does it need to be rinsed off and then how long do I have to wait before staining. When applying stain how long before it dries ( do I need to be concerned about rain in the forecast for the following day). I have about 325 feet of fence. Also, how many coats of stain?

TWP Stains Authorized Dealer
Admin
10 years ago

[quote name=”Dot Chamberland”]Is this good for new pressure treated deck? If yes, should I wait a period of weeks or months before applying?[/quote]
Yes it can be used on pressure treated wood. Please read this about new wood:
http://www.twpstainhelp.com/prepping-new-wood-for-twp-stains/

Dot Chamberland
Dot Chamberland
10 years ago

Is this good for new pressure treated deck? If yes, should I wait a period of weeks or months before applying?

TWP Stains Authorized Dealer
Admin
10 years ago

[quote name=”Tyson”]Is it completely necessary to weight 30 days before painting over the treated wood with an oil based paint? What will happen if done too early?[/quote]
Is this new wood? If so you need to wait 4-12 months: http://www.twpstainhelp.com/prepping-new-wood-for-twp-stains/

Tyson
Tyson
10 years ago

Is it completely necessary to weight 30 days before painting over the treated wood with an oil based paint? What will happen if done too early?

compare TWP stains
10 years ago

[quote name=”TheSealerStore”][quote name=”thudson2″]I used the Gemini Cleaner and Brightner combination on my deck and apparently did not get all of it removed as there are white spots on some of the boards after staining. The white spots were not noticeable prior to staining. Is there a solution to getting the white spots out? Treated wood deck, TWP 100 stain, Cedartone 101, wood age 1.5 years, condition of wood good, not previously stained, large wood deck for above ground pool. Central Texas.[/quote]
White spots? Around knots? If so that is normal.[/quote]

Some are around knots, but others are where there is more “open grain”. Will the white fade over time?

TWP Stains Authorized Dealer
Admin
10 years ago

[quote name=”thudson2″]I used the Gemini Cleaner and Brightner combination on my deck and apparently did not get all of it removed as there are white spots on some of the boards after staining. The white spots were not noticeable prior to staining. Is there a solution to getting the white spots out? Treated wood deck, TWP 100 stain, Cedartone 101, wood age 1.5 years, condition of wood good, not previously stained, large wood deck for above ground pool. Central Texas.[/quote]
White spots? Around knots? If so that is normal.

compare TWP stains
10 years ago

I used the Gemini Cleaner and Brightner combination on my deck and apparently did not get all of it removed as there are white spots on some of the boards after staining. The white spots were not noticeable prior to staining. Is there a solution to getting the white spots out? Treated wood deck, TWP 100 stain, Cedartone 101, wood age 1.5 years, condition of wood good, not previously stained, large wood deck for above ground pool. Central Texas.

TWP Stains Authorized Dealer
Admin
10 years ago

[quote name=”A E Dilts”]How long should our stained deck last?
We used TWP 100 and it looks terrific. We did have to sand the previously treated deck before applying. The deck is treated pine and was 7 years old.. After sanding the condition was pretty good. It was previously stained by a previous owner …not sure of the product, but it looked poor and was starting to peel. We live in Atlanta and the deck is now under a canvas awning.
Thank you.[/quote]
2-3 years is normal for your area.

A E Dilts
A E Dilts
10 years ago

How long should our stained deck last?
We used TWP 100 and it looks terrific. We did have to sand the previously treated deck before applying. The deck is treated pine and was 7 years old.. After sanding the condition was pretty good. It was previously stained by a previous owner …not sure of the product, but it looked poor and was starting to peel. We live in Atlanta and the deck is now under a canvas awning.
Thank you.

TWP Stains Authorized Dealer
Admin
10 years ago

[quote name=”Rob Nicholas”]Have installed new kiln-dried pressure-treated Southern pine boards on my deck. Do these boards need to weather before applying the stain? If so, how long? I was thinking about using a brightener before staining-is that necessary? I am in North Carolina[/quote]
For kiln dried, wait about a month and prep with the Gemini Kit to remove mill glaze. You need both cleaner and brightener.

1 13 14 15 16 17 30
1.8K
0
Would love your thoughts, please comment.x