TWP 100 Stain

by Administrator

TWP 100 Series Deck Stain – The Best Deck Stain

TWP 100 StainNeed Help or Advice when using TWP 100 Stain?

TWP 100 Series Total Wood Protectant (TWP) Wood Deck Stain protects and prolongs all exterior woods, decks, and fences. TWP Wood Deck Stains and Sealers is a distinctive mixture of chemicals blended together to form a professional strength formula that preserves exterior wood surfaces in numerous ways. 

TWP 100 Series Stain will perform at its maximum potential when the wood is properly prepped and when the stain is properly applied. Unfortunately not all wood is in the same condition prior to applying the stain.

Order Now: TWP 100 Series

Do you have any questions about using the TWP 100 Wood and Deck Stain?

Please answer these few questions to achieve the best possible results with your TWP 100 Wood and Decking Stain.

  1. info buttonAge of wood?
  2. Type of wood?
  3. Condition of the wood?
  4. Has it been stained previously and if so with what brand of stain?
  5. Small description of the area to be treated.

Ask Questions in Comment Area Below

Subscribe
Notify of
guest
1.8K Comments
Inline Feedbacks
View all comments
Larry T. Flesher
Larry T. Flesher
2 years ago

Want to get 5gal TWP101 cedar tone delivered

Brad Olhava
Brad Olhava
2 years ago

Cedar decking and Douglass fir railings and pickets. 3yrs old in great condition. Has bean treated with Cabot 2101 clear and it does not repel water. Deck is 12’x22’.

TWP Stains Authorized Dealer
Admin
2 years ago
Reply to  Brad Olhava

Prep with this kit: https://www.twpstain.com/restore-a-deck-stripper-brightener-kit-detail

And stain with the TWP 1500 Series.

Mike Roehl
Mike Roehl
2 years ago

We have used TWP 101 cedar tone on our cedar deck for years. This year my wife got a gallon of the 1501 cedar tone I’m wondering if they are the same other then the VOC and can they be used together?

TWP Stains Authorized Dealer
Admin
2 years ago
Reply to  Mike Roehl

No, they are not the same and not the same color. You can use it but you will need to strip off the 101 first.

Keith
Keith
2 years ago

Is the TWP 120-1 available in any stores in Tyler Texas?

TWP Stains Authorized Dealer
Admin
2 years ago
Reply to  Keith

We sell online only as a TWP dealer.

Charles
Charles
2 years ago

My deck is one year old and I’m going to stain. Does it need any prep work before applying and do you use the 100 series or 1500 series and how many coats do you recommend? 

TWP Stains Authorized Dealer
Admin
2 years ago
Reply to  Charles

See here:
https://www.twpstainhelp.com/prepping-new-wood-for-twp-stains/

as for which series, that depends on where you live. 

Leslie
Leslie
2 years ago

I’m having a house built with cedar headers above the windows in Kansas City, MO.  The cedar will be in full sun for most of the day.   Would it be best to get 100 or 200?  Thanks!

TWP Stains Authorized Dealer
Admin
2 years ago
Reply to  Leslie

Use the 100 Series. See here about new wood: https://www.twpstainhelp.com/prepping-new-wood-for-twp-stains/

MTS
MTS
2 years ago

I power washed the deck 3 times in 3 days, then removed and sanded the boards on all sides. about 70% of the boards I turned over and used that side for the surface. Most of the screws were not coated and were rusted badly. After removing all the screws I drilled out the holes and filled them with Elmer’s wood filler.  I plan to coat 3 sides with a semi transparent stain. After that I will attach the boards to the deck. which series do you think I should use. I don’t want to have to stain every year.

TWP Stains Authorized Dealer
Admin
2 years ago
Reply to  MTS

You should not have used wood filler. It will fail and will not “stain” to blend. Only stain the exposed sides. Which series to use depends on where you live?

Buzz Jelinek
Buzz Jelinek
2 years ago

Should I apply a water sealant after I apply TWP 100 Series stain to my porch floor?

TWP Stains Authorized Dealer
Admin
2 years ago
Reply to  Buzz Jelinek

No, you can never top coat over the TWP.

Jim Gold
Jim Gold
2 years ago
Reply to  Buzz Jelinek

It’s a sealer and stain

PK
PK
2 years ago

After applying the RAD Stripper and brighner and washing away (I power washed after applying stripper and rinsed after applying brihtner), I see residues on the wood while drying. What should I be doing before applying the stain?

TWP Stains Authorized Dealer
Admin
2 years ago
Reply to  PK

Post a picture.

PK
PK
2 years ago
Reply to 

See the photos. Do I have to Powerwash again?

TWP Stains Authorized Dealer
Admin
2 years ago
Reply to  PK

That is oxidation. It typically does not show when stained but you can lightly sand it if you want.

PK
PK
2 years ago
Reply to 

Did you mean ‘it does not show up when stained’ or ‘it does show when stained’? I did some sanding with a rotary sander, but, it did not take it away much since the wood itself is not very flat. Appreciate your answer.

TWP Stains Authorized Dealer
Admin
2 years ago
Reply to  PK

Sorry, typo. Does not show.

compare TWP stains
2 years ago

Can you provide me with a SDS for the TWP 100 and 1500?, And what is the difference in the Base oil used are they both the same base oil whit 1500 being less oil to reduce the VOC?

TWP Stains Authorized Dealer
Admin
2 years ago
Reply to 
compare TWP stains
2 years ago

What is the Base of your VOC that allows you to change it between your 100 series and the 1500 series ? Thanks

TWP Stains Authorized Dealer
Admin
2 years ago
Reply to 

Bases do not make VOCs, how much evaporates into the ozone does. Both are oil-based.

compare TWP stains
2 years ago

What is the self life of your TWP 100?

TWP Stains Authorized Dealer
Admin
Joe
Joe
2 years ago

What is the difference between 100 series and 1500 series? I have two fences, one new (bare wood) and one 10 years old and previously stained with a water based stain. Which stain should I use for each of my fences?

TWP Stains Authorized Dealer
Admin
2 years ago
Reply to  Joe

The difference is VOC levels and what is allowed in your state. Where do you live?

Joe
Joe
2 years ago
Reply to 

California.

TWP Stains Authorized Dealer
Admin
2 years ago
Reply to  Joe

You have to use the 1500 Series for CA.

TJC
TJC
2 years ago

I just finished sanding my deck and stairs and am ready to clean and brighten, should I use a stiff brush to clean or a pressure washer for the best results? I pressure washed before sanding and it left a rough surface, just dont want to see that again after spending so much time sanding.

TWP Stains Authorized Dealer
Admin
2 years ago
Reply to  TJC

Pressure washing lightly for prep while using the cleaner and brightener to open up the wood grain.

Rjones
Rjones
2 years ago

Hello, couple of questions.  I used the TWP 100  2 years ago and am ready to reapply.  Which prep products do I need. Also, can this be put on a damp deck after being cleaned or does it have to dry.   ? Finally, if applying two cots it has to be wet on wet?  If so how long before second coat go on?  Thanks 

TWP Stains Authorized Dealer
Admin
2 years ago
Reply to  Rjones

Clean and brighten for prep with the Gemini Restore Kits. Let dry for 48 hours. Has to be applied wet on wet for two coats. 40-60 minutes. 

Edward Bonk
Edward Bonk
2 years ago

What is the lowest temperature I can stain a log home??

TWP Stains Authorized Dealer
Admin
2 years ago
Reply to  Edward Bonk

50 degrees.

Eugene L Campbell, Jr
Eugene L Campbell, Jr
3 years ago

Hi…I used the TWP series 100 Honeytone stain on my house last summer.  I lightly power washed this summer to remove pollen and mildew from building up.  I am thinking about applying a light coat of your clear stain and not another coat of honeytone.  I think the honeytone would darken the current look.  I like the current look.  Should I do this or apple another light coat of honeytone? thanks!

TWP Stains Authorized Dealer
Admin
3 years ago

You cannot apply the clear over the stain colors. Use the same color as before. 

Eric
Eric
3 years ago

I live in Kansas City MO and plan on staining an unfinished cedar deck that’s about a year old.  Would you recommend 100 or 1500?  Also, do you have any photos of a pecan and dark oak mixture?  I like dark oak but would like it a little lighter.  Thanks!

TWP Stains Authorized Dealer
Admin
3 years ago
Reply to  Eric

Use the TWP 100 Series after prep with the Gemini Kit. We do no have mixed-color photos. If you want a lighter Dark Oak, add some Clear into it. 

Taylor
Taylor
3 years ago

Our 12mo old deck is cleaned and ready to be stained, but we got almost 2 inches of rain this past weekend. How long do we have to wait for the wood to dry out to stain it?

TWP Stains Authorized Dealer
Admin
3 years ago
Reply to  Taylor

48 hours.

Roger
Roger
3 years ago

My privacy fence is 20 years old.  I have only used TWP over the years.  I have applied TWP four or five times.  All the wood is in good condition, still looks great.  Not sure which of your two stains to use?  Also, are there any local distributors in the Indianapolis area?

TWP Stains Authorized Dealer
Admin
3 years ago
Reply to  Roger

For IN, you need the 1500 Series. We sell online only: https://www.twpstain.com/twp-1500-series

Neil
Neil
3 years ago

What type of water repellent is in your stain I’m putting a hot tub on my deck and would like to coat it to help protect it

TWP Stains Authorized Dealer
Admin
3 years ago
Reply to  Neil

TWP is a semi-transparent stain that sheds water. It is not just a “water repellent” as it provides mildew, water, and sun protection all in one.

Leo stoffel
Leo stoffel
3 years ago

Can I apply twp 100 like sunrise b4 direct sunlight? Temps in 90’s. Will have bout 1 hour b4 direct sun hits deck floor. 

TWP Stains Authorized Dealer
Admin
3 years ago
Reply to  Leo stoffel

Yes.

compare TWP stains
3 years ago

1.  What are the differences between the Gemini and RAD products for prep?2.  What circumstances determine when you would recommend one over the other?

TWP Stains Authorized Dealer
Admin
3 years ago
Reply to 

Gemini is a Cleaner and Brighener Kit and the RAD is a Stripper and Brightener Kit. Which to use depends on your current condition?

Mary
Mary
3 years ago

I put to coats of stain on some outdoor wood chairs we have. First coat dried just fine now second coat is very tacky. They been sitting now for 24 hours and still tacky

TWP Stains Authorized Dealer
Admin
3 years ago
Reply to  Mary

Let it dry and cure out but sounds like you over-applied. It will cure but it may take a few days or longer.

compare TWP stains
3 years ago

My  prep work on porch is almost complete. I used the stripper with both additives and the brightener.  Unfortunately, due to weather it’s been 3 weeks since that was completed.I have enough of the brightener for another ‘shot’ however I do not the cleaner and time is of the essence as I’m having some major adjacent landscaping done in a week.   It’s a loaded question, but is there an alternative product I can use to clean/rinse off the porch and railing.I started this project in ample time for a normal year, unfortunately this is unpredictable weather this summer not seen for over 15 years.Help!

TWP Stains Authorized Dealer
Admin
3 years ago
Reply to 

Give it a good pressure wash with water, apply the brightener, rinse well. You will be okay.

compare TWP stains
3 years ago

Can TWP be used to seal/protect charred cedar (aka shou sugi ban)? If so which specific product do you recommend? I’ve done sample tests with tung oil, mineax wood hardener and water based poly and the tung worked best (after 2 months in outside in south facing sun and rain) but I’m concerned about the longevity of tung oil. My friend recommended TWP. Thanks 

TWP Stains Authorized Dealer
Admin
3 years ago
Reply to 

Yes, you can use it as long as the wood is porous. Try the TWP 1500 Series in Honeytone color.

Rose
Rose
3 years ago

Is this useable on untreated pine wood?

TWP Stains Authorized Dealer
Admin
3 years ago
Reply to  Rose

Yes, works great for pine.

compare TWP stains
3 years ago

1. Which application tool is best for a novice stainer?  2. Spray or pad?3. With either application tool are 2 coats, wet on wet, recommended?

TWP Stains Authorized Dealer
Admin
3 years ago
Reply to 

Stains pads or brushes. Two coats wet on wet unless new wood. Just one coat.

compare TWP stains
3 years ago

1.How long after staining before it can “handle rain?2. Are 2 coats of TWP recommended for all surfaces,horizontal and vertical?

TWP Stains Authorized Dealer
Admin
3 years ago
Reply to 

About 6-12 hours before rain.

Barney parker
Barney parker
3 years ago

Follow up from Barney——-what do you mean by wet on wet? I assume you mean that If you need 2nd coat you must do it while stain is wet??    Barney

Barney Parker
Barney Parker
3 years ago

I have redwood deck in Colorado that has been stained about every two years with transparent stain that is no longer available.Deck is about 9 years old and good shape.has redwood stain on now.is 100 series good enough or do I need 1500 series? Looks like your redwood may be quite Red. From pictures looks like Rustic may be good choice. Looking to go with semi transparent this time???Barney

TWP Stains Authorized Dealer
Admin
3 years ago
Reply to  Barney Parker

You need the TWP 1500 for CO. Must strip off the prior stain: https://www.twpstain.com/restore-a-deck-stripper-brightener-kit-detail

Kate Epps
Kate Epps
3 years ago

I already prepped fence with pressure washer and sent you a picture.  My question now is Twp 100 or Twp 1500? I live in Pa.

TWP Stains Authorized Dealer
Admin
3 years ago
Reply to  Kate Epps

TWP 1500 for PA.

Kate epps
Kate epps
3 years ago

I have 2200 sq ft of cedar fence 7 yrs old never stained.  Which stain?

TWP Stains Authorized Dealer
Admin
3 years ago
Reply to  Kate epps
Jim
Jim
3 years ago

Is ok to apply Dark Oak 100 with a roller?

TWP Stains Authorized Dealer
Admin
3 years ago
Reply to  Jim

Stain pads and brushes are better than rollers. Rollers can splatter.

bob k
bob k
3 years ago

Is the 1500 series better than the 100 series

TWP Stains Authorized Dealer
Admin
3 years ago
Reply to  bob k

No, they last about the same.

Jeff
Jeff
3 years ago

Hello I have a new trailer with pressure treated pine boards. What product, if any, would you recommend to preserve the new boards on my trailer? 

TWP Stains Authorized Dealer
Admin
3 years ago
Reply to  Jeff

Use the 1500 series after wait and prep: https://www.twpstainhelp.com/prepping-new-wood-for-twp-stains/

Tony
Tony
3 years ago

Deck is 6 years old pressure treated pine. TWP 100 Pecan applied 5 years ago. Has had several cleanings and color is fading on deck located outside. The deck under roof still looks great.Time for a deep clean and restain. Going back with same product in Tennessee. What cleaning and brightening kit do you suggest? Not sure if I have to strip or not. Thank you. 

TWP Stains Authorized Dealer
Admin
3 years ago
Reply to  Tony
Rosanne
Rosanne
3 years ago

If you don’t strip but do prep with kit, can you use a different color if you don’t mind a possible non uniform color outcome?

TWP Stains Authorized Dealer
Admin
3 years ago
Reply to  Rosanne

Only if the current stain is TWP. Also, stripping is just as easy as cleaning.

Barry
Barry
3 years ago

I can’t find my original post from earlier this morning so I have to start over lol…. Michigan deck built in 2011. Stained TWP in 2013. Nothing else done until I power washed it last summer and obviously the deck is faded bad, especially near the pool ladder area (chlorine in the water). Going to use TWP 100 this year. But I’m wondering which prep products should I use? The Gemini cleaner and brightener or the RAD Stripper and Brightener? Does it even need a cleaner since it was power washed last year? Thanks!

TWP Stains Authorized Dealer
Admin
3 years ago
Reply to  Barry

Gemini kit for prep. Yes you need it. 

Mel
Mel
3 years ago

Hello, we used TWP100 solid stain Cape Cod Gray, while we like the product the colour is too blue, is it possible to paint over it with another darker stain.  If so what might you suggest, not necessarily a brand name but I am thinking it might need to be an oil bases stain…

TWP Stains Authorized Dealer
Admin
3 years ago
Reply to  Mel

No, you would have to remove it first using the RAD Stripper and both additives. Brightener after.https://www.twpstain.com/restore-a-deck-stripper-brightener-kit-detail
https://www.twpstain.com/wood-stain-strippers/rad-stripper-additives

compare TWP stains
3 years ago

Is there any way to find someone that is familiar with TWP products in my area?I wondered if there is some kind of registration by area of applicators?Deanna from Appleton, Wisconsin920 268-5554

TWP Stains Authorized Dealer
Admin
3 years ago
Reply to 

Sorry but we do not have a list of contractors.

Josh
Josh
3 years ago

I stained my deck a year ago with twp100. I just replaced some deck boards with brand new pressure treated boards. Should I let them weather OR go ahead and strip, brighten, and stain them?

TWP Stains Authorized Dealer
Admin
3 years ago
Reply to  Josh

Weather for 4 months and then prep. 

Randy McBride
Randy McBride
3 years ago

What is your best semi-transparent stain for a new deck and fence.?  Both are treated pine.

TWP Stains Authorized Dealer
Admin
3 years ago
Reply to  Randy McBride

See here about new wood first: https://www.twpstainhelp.com/prepping-new-wood-for-twp-stains/
Look at the TWP 100 or 1500 Series.

Scott
Scott
3 years ago

Wondering if you have any pictures of decks stained with the CapeCod Gray?  We have a gray two story and brand new deck needing staining.  The Gray is a different option.

TWP Stains Authorized Dealer
Admin
Scott
Scott
3 years ago
Reply to 

what about the praire gray or the pecan colors on a house?

TWP Stains Authorized Dealer
Admin
3 years ago
Reply to  Scott
Mike Kowalczyk
Mike Kowalczyk
3 years ago

I rented a floor sander and have taken the deck down to bare wood what would you recommend if anything

TWP Stains Authorized Dealer
Admin
3 years ago
Reply to  Mike Kowalczyk

Gemini Restore Kit for final prep.

Mark Weinmann
Mark Weinmann
3 years ago

can you apply a second coat after the first is dry?

TWP Stains Authorized Dealer
Admin
3 years ago
Reply to  Mark Weinmann

It is not always suggested as it depends if the wood will take the stain. Do a test spot to see who it dries.

Mike
Mike
3 years ago

What’s the difference between the 100 snd 200

TWP Stains Authorized Dealer
Admin
3 years ago
Reply to  Mike

The 200 is designed for shakes and shingles while the 100 is for all wood type.

Dennis
Dennis
3 years ago

Would the TWP 100, DARK OAK 103 technically have the highest UV rating since it appears to be the darkest color in the series?

TWP Stains Authorized Dealer
Admin
3 years ago
Reply to  Dennis

No, the Dark Oak would not be any better than Rustic, Redwood, Cedartone, etc.

David
David
3 years ago

Can I stain Cape Cod Grey over Cedartone

TWP Stains Authorized Dealer
Admin
3 years ago
Reply to  David

You will need to strip and brighten for prep: https://www.twpstain.com/restore-a-deck-stripper-brightener-kit-detail

compare TWP stains
3 years ago

30 yr old Cedar siding previously stained with Cedartone Natural 100. Love the look of it, however, the southeast part of the house is much thirstier than the rest of the house because it sees more weather and sun. (Northeast Wisconsin). I notice some of the boards are in ill repair some curling a little bit and some cracked so should I coat that side of the house more frequently than the rest of the house and does it need the 2-step cleaner brightener each time I recoat?

TWP Stains Authorized Dealer
Admin
3 years ago
Reply to 

Yes, it does.

1.8K
0
Would love your thoughts, please comment.x