TWP Semi-Solid Pro Series Stain and Gemini Restore A Deck Kit Combo Pack
This Combo Kit comes with both 5 Gallons of TWP Semi-Solid Pro-Series Oil-Based Stain and the Gemini Deck Cleaner and Brightener Kit for prepping your wood.
1 Gemini Restore A Deck Kit
Restore-A-Deck Cleaner and Brightener system is a powerful “eco-friendly” two-part restoration system.
Step 1 Wood and Deck Cleaner that deeply cleans your wood to remove dirt, grime, mold, algae, and general graying. The cleaner will help prep neglected wood and or prep for re-coating with a wood or deck stain.
Step 2 Wood Brightener is used after the wood cleaner to “brighten” the wood while neutralizing the cleaner to a natural pH balance. This step will improve the overall appearance of your wood while helping the wood deck stain longevity.
The kit covers 750-1000 sq feet when mixed.
1 TWP Semi-Solid Pro Series 5 Gallon Pail
Available in 30 Custom Colors, the TWP® Semi-Solid Pro-Series will keep your wood beautiful, fresh, and looking new longer! The ease of application and maintenance will allow you to enjoy your investment for years to come.
Max UV Protection = Longer Life from Fading!
TWP® Semi-Solid Pro-Series is the highest-rated semi-solid stain on the market today.
TWP® Semi-Solid Pro-Series provides a broad spectrum of weather protection, is water repellent, and aids in color retention. TWP® Semi-Solid Pro-Series resists water absorption that causes warping, cracking, splitting, and prevents freeze damage in colder climates. Use TWP® Semi-Solid Pro-Series to Restore and Protect YOUR GREAT OUTDOORS!
Use TWP® Semi-Solid Pro-Series on these exterior wood applications:
- Decks
- Siding & Shingles
- Rough sawn cedar
- Log homes
- Fences
- Shakes & fascia
TWP® Semi-Solid Pro-Series Product Advantages:
- Available in 30 Custom Colors
- Longer UV Protection
- Easy application
- Beautifies and protects
- Repels water
- Time-tested quality
- Mildew resistant stain surface
- Easy to maintain
Print TWP Semi-Solid Color Chart (click to open in a new window then right-click to print in full color): TWP Semi-Solid Color Chart
*Please click the link and print the chart in full color. Note that each color shows how it looks in full sun or in the shade. This is only due to UV reflection.
Additional Important Notes:
*We do not guarantee stain colors as they will vary widely depending on the wood type, age, of wood, prepping of wood, and application.
*All TWP Pro-Series Semi-Solid colors are custom made and cannot be returned for exchange or credit.
*TWP Pro-Series Semi-Solid are all customer orders. There can be a 1-3 day delay before they ship out from our warehouse!
TWP Semi-Solid Pro-Series 5 Gallon Deck Stain
Project is in North Carolina and we have a pressure treated handicap ramp built 2 years ago that was never finished or sealed. We were thinking of using Semi-Solid in Thunderstorm to match the building colors. Not sure if that is best product? Ramp is 6’wide x 75′ Long. Additionally, not sure if any steps or products are required before we stain it so looking for advice please?
Use the Gemini Kit for the prep. The semi-solid would work very well here.
Does TWP come in a non skid? If not is there an additive pkg to put in the stain
TWP is a penetrating stain. It is not possible to add a non-skid additive to a penetrating stain.
I’ve just stripped & sanded with 60 grit my 14 year old Wisconsin deck of the Rustoleum 6X Rocksolid deck coating. I am now going to apply the semi-solid Cabin Fever. Do I still need to use the Gemini Cleaner/Brighter before the stain is applied? Surface is now clean and bright so wasn’t sure if the Gemini products are really required.
Yes, it will help to open up the wood pores so the TWP can penetrate deeper into the wood grain.
do twp semi-solid need a sealer?
No need and you cannot apply a sealer over a deck stain. It would peel if you did.
Deck is 3 years old the attached photo is the current state of deck. Recently started having deck screws breaking. Deck is in direct sunlight all day. What would be the best stain for all day uv?
Where are you located?
Pennsylvania
You will need the 1500 Series for PA:
https://www.twpstain.com/wood-and-deck-stains/twp-wood-stains/twp-1500-series
Does the calculator estimate of stain needed work for new PT deck when you recommend one coat? We have 1050 sq ft of PT pine deck that’s been down about 6 months.
The calculator is for two coats applied wet on wet. When doing one coat use 2/3 the amount the calculator shows.
Put on Behr Deck Over 8 years ago. Deck is over 15 years old, was not taken care of, is weathered, cracks and etc, on East side of house receives sun and shade. Have pressure washed, what is best way to remove the rest of it. Is TWP Pro Semi Solid Wood Stain best to use after using cleaner and brightner. Live in Missouri. Thanks
Berh Deckover will have to be sanded off to remove fully. Once removed, the TWP semi-solid colors would work great!
is 60 grit sand paper best and sand with grain, correct. Thanks
Correct.
I stained a small shed with dark oak, #103 It is time to restain. I want to use a dark colored semisolid stain this time. If the semisolid and 100 series stains have the same penetrating oils, why do I have to strip the dark oak first? Is it an adhesion issue or a color issue?
Both.
what color of your semi solid would best match the color of Olympic elite mountain cedar color
Sorry, but we have no idea as we are not familiar with Olympic colors.
Older deck that now needs some hiding qualities because of filled screw holes, repairs, etc…..Does this product have any hiding qualities?
Yes, it is a semi-solid, so it hides most of the grain but not all. Make sure to prep by removing any previous coatings.
Custom made in 30 colors!