TWP 1500 5 Gallon Stain
TWP 1500 is a Semi-transparent Oil-Based wood stain and preservative that is allowed in all 50 states.
The new TWP® 1500 formula is designed to penetrate better, dry faster and outperform the previous TWP® 500 series formula.
TWP® 1500 Series is an EPA registered wood preservative which prevents structural damage and wood decay on exterior above ground wood surfaces such as fencing, decking, wood siding, log homes, and roofing. TWP® 1500 Series resists water absorption that causes warping, cracking and splitting as well as preventing freeze damage in colder climates.
TWP® 1500 Series is a low VOC preservative with special U.V. absorbing pigments that prevent unsightly wood graying, darkening and fading. The selected mildewcides inhibit the growth of mold and mildew which assist in preventing premature discoloration.
TWP® 1500 Series will keep your wood beautiful, fresh and looking new longer. The ease of application and maintenance will allow you to enjoy your investment for years to come.
Key Features
- Preserves natural wood color
- EPA registered wood preservative
- Professional choice for all exterior wood surfaces
- Semi-transparent stain preserves natural color
- Sheds water longer
- Prevents mold and mildew
- Helps to prevent wood rot
- Easy to apply and can be cleaned and recoated as needed
- Helps in the prevention of warping, cracking and splitting
- Low 250 VOC formula, compliant in 50 states
*We do not guarantee stain colors as they will vary widely depending on the wood type, age of wood, prepping of wood, and application. Small samples are available.
TWP 1500 Series 5 Gallons Deck Stain
Does natural stain offer uv protection?
Yes, the Natural is tinted and does offer UV protection. See here for TWP 1530 Natural Photo album:
https://www.twpstain.com/twp-1530-natural
how do you get the $20 rebate on the 5 gallon twp 1501
See here: https://www.twpstain.com/twp-stain-rebate
We have a 12 year-old Mahogany deck. During the first years we had it, we would sand and seal with a clear Timber Oil finish that had a beautiful sheen. The deck looked like beautiful hardwood floors. We have always strived to retain the original color of the Mahogany vs. letting the wood go gray.
Since VOC legislation, that kind of sealer is no longer available. So, we have tried virtually every kind of “clear” sealer on the market. Some of them left a yellow tint to the wood, which wasn’t at all desirable. Some have left black gunk. Some had barely lasted half of the summer season. Last year was the worst so far after using Thompson’s–black gunk and for the first time, didn’t last and the deck is gray–the most gray that it has ever been.
So, we are looking for our next product to try.
4 questions:
If we use the restore a deck kit–cleaner and brightener–will we have to sand the deck to get back to a Mahogany color or will the brightener restore the original color?
We really don’t want to change the color of the Mahogany. Do we need to use TWP 1500 Clear or Natural, or would Natural change the color?
The deck is exposed to a lot of sun and weather. Will the TWP 1500 clear last the summer season?
Will TWP 1500 leave a black gunky residue on the deck as it begins to break down?
Thanks in advance for the response.
The TWP Clear will not provide UV protection from graying. The Natural will as it is tinted/colored. You must have tint in your stain if you want UV protection from graying. The Natural will enhance/change the color of the wood.
Thanks for the quick response. I had other questions that I had hoped we could get assistance with:
If we use the restore a deck kit–cleaner and brightener–will we have to sand the deck to get back to a Mahogany color or will the brightener restore the original color?
The deck is exposed to a lot of sun and weather. Will the TWP 1500 clear last the summer season?
Will TWP 1500 leave a black gunky residue on the deck as it begins to break down?
Please let me know if you can assist.
TWP Clear grays naturally in months but protects from water, etc for the year or longer. Clear stains or sealer will not give UV protection for a year. You must have a tint in the stain for UV protection
The prep kit does restore the color but you will need the Stripper/Brightener Kit to remove the Thompsons.
TWP does not leave “black” gunk on the deck but the Clear will gray naturally.
So, do I understand correctly that the Brightener neutralizes the Stripper?
And do I understand from your response above that we should not need to sand the Mahogany to get the color back from gray to the original Mahogany color–the stripping and brightening should do it?
The stripping and brightening will remove the Thompsons and restore the color. You should not have to sand.
The brightener does neutralize the stripper.
Received a sample of 1500 in gray last year. I thought it was cape cod, but in finding receipt it was driftwood. Is that an available option any longer? I see the cape cod gray but im in a non shippable state. Thanks
Hello Mike, the TWP 1500 Series has never had a gray color nor has any of the Series had a “Driftwood Gray”. I believe you may have gotten the sample confused with a different brand of stain?
When using TWP1500, does the surface get slippery when it is wet?
No, it is does not as TWP is a penetrating stain.
We have always used TWP on our cedar decks no we are ready to clean and restore the deck and have some dark spots how do I get rid of them before I apply a new coat
Please post a picture on the website so we can see.
I keep trying to upload the picture but it is apparently not working
You cannot upload files that are larger than 3mb. Make sure the image is not too large of a file. Here is an example of an uploaded file.
Which 1500 series stain will preserve the natural red cedar look? Thanks, Brian
All the TWP 1500 colors will preserve the cedar. Pick any color you like that will enhance the natural color.
I am building a new pressure treated pine deck at my Daphne Alabama home. what prep is needed for TWP 1500 on a new deck?
Tom, please read this about new wood and using TWP: https://www.twpstainhelp.com/prepping-new-wood-for-twp-stains/
How many years do you suggest for reapplication on cedar siding?
Depending on the UV exposure, the TWP 1500 should last 4-6 years and possibly longer for vertical cedar siding. Please post a picture when done. We love cedar sided homes!
Sorry – how much dry weather do I need before I stain?
2 Days after prep for drying and 12-24 hours after applying before rain.
Any comments on pollen?
Any pollen that lands on the stain when wet could possibly feed mildew growth down the road.
I bought the Restore a Deck kit and 5 gallons of TWP 1530. I’ve got small windows of weather to work with, and we’re approaching heavy pollen season. Once I’ve done the prep work, dry weather do I need to before staining? How much pollen accumulation is too much? Any tips on how to work around it? Or just need to wait till it’s over?
Do you have a color to add that will be close the natural gray that Redwood will be when it ages?
Hello, sorry but it is not possible to custom tint the TWP stains not does the 1500 Series come in a gray color.
I am ordering 10 gallons semi transparent stain to use on a cedar sided barn. I would like to know which stain would have the most orange tint. I am leaning towards the 1502 stain Redwood all of the others seem too brown.
See this for color tips: https://www.twpstainhelp.com/twp-1500-colors-explained/
The 1502 is red in color. The 1530 natural is more of an orange.
My airless sprayer has a tip of .015 max. Will the 1500 work in this size gun?
Yes it will.
I have used TWP 1511 California Redwood on my deck 18 months ago and I want to give it another coat. How long does it take to dry?
Prep first with the Gemini Restore Kit. After staining, it should dry in a day but this varies on the weather.
[quote name=”MMartin”][quote name=”TheSealerStore”][quote name=”MMartin”]I have a new deck installed a year ago that is ready for stain. It is about 1000 sqft including steps, railing, accent beams, lattice, etc. Will 5 gallons of stain be enough?[/quote]
No. See this for help on the amount:
https://www.twpstain.com/twp-deck-stain-calculator
Should be closer to 10 gallons for two coats applied wet on wet.[/quote]
Per your help page and under [b]Staining New Wood and Decking for the First Time[/b], it advises to apply 1 coat for new wood. Is that no longer correct? “Even after the waiting period and the proper prepping, new smooth wood is still not as absorbent as it will be in a few years.[b]We strongly suggest only applying 1 coat of the TWP Stains the first time.[/b] Do not over apply as the TWP may not penetrate into the wood correctly…”
https://www.twpstainhelp.com/prepping-new-wood-for-twp-stains/%5B/quote%5D
Your deck is a year old so it is really not “new” anymore. Either apply two light coats or one good coat is fine. If you do one coat, you will need about 7 gallons.
[quote name=”TheSealerStore”][quote name=”MMartin”]I have a new deck installed a year ago that is ready for stain. It is about 1000 sqft including steps, railing, accent beams, lattice, etc. Will 5 gallons of stain be enough?[/quote]
No. See this for help on the amount:
https://www.twpstain.com/twp-deck-stain-calculator
Should be closer to 10 gallons for two coats applied wet on wet.[/quote]
Per your help page and under [b]Staining New Wood and Decking for the First Time[/b], it advises to apply 1 coat for new wood. Is that no longer correct? “Even after the waiting period and the proper prepping, new smooth wood is still not as absorbent as it will be in a few years.[b]We strongly suggest only applying 1 coat of the TWP Stains the first time.[/b] Do not over apply as the TWP may not penetrate into the wood correctly…”
https://www.twpstainhelp.com/prepping-new-wood-for-twp-stains/
[quote name=”MMartin”]I have a new deck installed a year ago that is ready for stain. It is about 1000 sqft including steps, railing, accent beams, lattice, etc. Will 5 gallons of stain be enough?[/quote]
No. See this for help on the amount:
https://www.twpstain.com/twp-deck-stain-calculator
Should be closer to 10 gallons for two coats applied wet on wet.
I have a new deck installed a year ago that is ready for stain. It is about 1000 sqft including steps, railing, accent beams, lattice, etc. Will 5 gallons of stain be enough?
[quote name=”Paul E”]I finished a new cedar fence last fall. I just power washed it and am going to let it dry a few days. I was planning on using the TWP 100 series but I see Amazon doesn’t carry it. How does the 1500 series compare? What are the differences?[/quote]
Amazon sellers are not authorized dealers of TWP. Order directly from our website. Both the 100 and 1500 can be bought here.
I finished a new cedar fence last fall. I just power washed it and am going to let it dry a few days. I was planning on using the TWP 100 series but I see Amazon doesn’t carry it. How does the 1500 series compare? What are the differences?
[quote name=”Brent U”]Can you describe the difference in tone between cedartone and california redwood?[/quote]
See this article:
https://www.twpstainhelp.com/twp-1500-colors-explained/
Can you describe the difference in tone between cedartone and california redwood?
[quote name=”Tom Price”]We’ve previously treated our pine camps with a semi-transparent Thompson’s waterseal in a gold cedar color. It has been several years and the old stain is very faded and not beading water in most locations. If we go with the TWP1500 series in black walnut what would our prep need to be[/quote]
Removal of the Thompsons with the Restore A Deck Stripper kit and pressure washing:
https://www.twpstain.com/restore-a-deck-stripper-brightener-kit-detail
[quote name=”Brent U”]I have an old cedar deck (unknown year of construction, probably 10 years old). I have completely stripped and sanded (60-80 grit). I am in Central Oregon, so lots of UV exposure but lots of snowfall, too. West facing deck gets lots of exposure and is not covered. I have been looking exclusively at penetrating oil stains: TWP 1500, A&C, Penofin, Storm, and Messmer’s. Is one of these more suited for this environment than the others?[/quote]
Of those, TWP is the only one that is registered as a wood preservative by the EPA. This means much better mildew and mold protection with excellent penetration and UV resistance.
I have an old cedar deck (unknown year of construction, probably 10 years old). I have completely stripped and sanded (60-80 grit). I am in Central Oregon, so lots of UV exposure but lots of snowfall, too. West facing deck gets lots of exposure and is not covered. I have been looking exclusively at penetrating oil stains: TWP 1500, A&C, Penofin, Storm, and Messmer’s. Is one of these more suited for this environment than the others?
[quote name=”Leonard Larson”]I have cedar siding above the logs. I’m looking for a stain that would be a shade lighter than the cedar. I used pecan on the logs last time and it is a lot lighter than the rough cedar siding.[/quote]
Honeytone is a shade lighter.
I have cedar siding above the logs. I’m looking for a stain that would be a shade lighter than the cedar. I used pecan on the logs last time and it is a lot lighter than the rough cedar siding.
[quote name=”Mike McGrew”]Is a roller adequate for application to deck?[/quote]
Rollers can be used but are not the best option. Stain pads and brushes:
https://www.twpstain.com/wood-and-deck-stains/application-tools/brushes-stain-pads
Is a roller adequate for application to deck?
[quote name=”Steve Perry”]I’m looking at staining my new cedar deck using the 1500 series. A contractor who gave me a bid said he would use the 200 series, which I researched and it appears to be designed for shingles, etc., but can also be used on decks. Question – what is the best series 200 or 1500 to stain the new deck?[/quote]
See this for new wood:
https://www.twpstainhelp.com/prepping-new-wood-for-twp-stains/
Once you wait and prep, you could use either Series.
I’m looking at staining my new cedar deck using the 1500 series. A contractor who gave me a bid said he would use the 200 series, which I researched and it appears to be designed for shingles, etc., but can also be used on decks. Question – what is the best series 200 or 1500 to stain the new deck?
[quote name=”Diane Charrier”]Does this stain have any UV protectants in it?[/quote]
All the colors have UV protection!
Does this stain have any UV protectants in it?
[quote name=”cvogler”]Hi, How do I send for samples?[/quote]
https://www.twpstain.com/stain-samples
Hi, How do I send for samples?
[quote name=”David McGee”]Hi. My deck was built 3 years ago using yellow wood at which time I stained it with TWP Pecan stain. How should I prepare the deck for re-staining and which product would be best to use? I am located in Missouri. Also, this time I would like to stain the deck a dark (burgundy?) color. Would this be the Rustic color? Thank you.[/quote]
The Rustic is a reddish/brown color. For the prep, use the Gemini Restore Kit:
https://www.twpstain.com/gemini-s-restore-a-deck-cleaner-and-brightener-kit
Hi. My deck was built 3 years ago using yellow wood at which time I stained it with TWP Pecan stain. How should I prepare the deck for re-staining and which product would be best to use? I am located in Missouri. Also, this time I would like to stain the deck a dark (burgundy?) color. Would this be the Rustic color? Thank you.
[quote name=”fullflaps2010″]I’m in SE Indiana and I’m interested in the TWP 1503 Dark Oak stain. When dry, what kind of finish will it have (i.e. glossy, satin, semi-gloss, etc.)?[/quote]
TWP is a penetrating stain. it is designed to soak in without any shine.
I’m in SE Indiana and I’m interested in the TWP 1503 Dark Oak stain. When dry, what kind of finish will it have (i.e. glossy, satin, semi-gloss, etc.)?
[quote name=”Roy Wilson”]Switching to TWP 1500 for my log home retaining. Used an oil based stain previously with mildewcide and a citronella based insect repellent. What additives do you recommend for the TWP products?[/quote]
There is already an EPA registered algaecide in the TWP. For insects, you can add this:
https://www.twpstain.com/bug-juice-insecticide
Switching to TWP 1500 for my log home retaining. Used an oil based stain previously with mildewcide and a citronella based insect repellent. What additives do you recommend for the TWP products?
[quote name=”ddhilt”]Did I order 1501 or 1530 last March as I want to be sure I order the identical color as last order?
Regards,
Deane[/quote]
1501 Cedartone
Did I order 1501 or 1530 last March as I want to be sure I order the identical color as last order?
Regards,
Deane
[quote name=”StanK”]We want a light color of the TWP 1500 Series. Which is the lightest?[/quote]
Honeytone 1515 is the lightest and Natural 1530 is the second lightest.
We want a light color of the TWP 1500 Series. Which is the lightest?
[quote name=”J.R.”]I am building a new house with cedar shake peaks in it. My painter said the best idea would be to stain all the shake with TWP before we install it on the house. Do you agree this is the proper method? And how many coats should we use?[/quote]
Only pre stain if the shingles are rough cut and are dry. See this for more info:
https://www.twpstainhelp.com/prepping-new-wood-for-twp-stains/
I am building a new house with cedar shake peaks in it. My painter said the best idea would be to stain all the shake with TWP before we install it on the house. Do you agree this is the proper method? And how many coats should we use?
[quote name=”Tommy Topper”]Would you recommend using a power sprayer for this stain. I understand nothing can beat the paint brush, but i was looking to save some time.[/quote]
Yes, you can spray the TWP, but you should always back brush or use a staining pad to ensure and even application.
Would you recommend using a power sprayer for this stain. I understand nothing can beat the paint brush, but i was looking to save some time.